Successful exploitation of this vulnerability could allow an unauthenticated attacker to create or delete administrator accounts, granting full administrative control.
\nThe following versions of KiloView Encoder Series are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.8 | \nKiloView | \nKiloView Encoder Series | \nMissing Authentication for Critical Function | \n
A missing authentication for critical function vulnerability in KiloView Encoder Series could allow an unauthenticated attacker to create or delete administrator accounts. This vulnerability can grant the attacker full administrative control over the product.
\n\nMitigation
KiloView has not responded to requests to work with CISA to mitigate this vulnerability. Users of affected versions of KiloView Encoder Series are invited to contact KiloView customer support for additional information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-29 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could allow an attacker to cause a denial-of-service condition.
\nThe following versions of Rockwell Automation ArmorStart LT are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.5 | \nRockwell Automation | \nRockwell Automation ArmorStart LT | \nUncontrolled Resource Consumption | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. This vulnerability is triggered during fuzzing of multiple CIP classes, which causes the CIP port to become unresponsive.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. During execution of the Achilles Comprehensive grammar tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. During execution of the Achilles EtherNet/IP and CIP grammar tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. After running a Burp Suite active scan, the device loses ICMP connectivity, causing the web application to become inaccessible.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. During execution of the Achilles EtherNet/IP Step Limit Storm tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. Fuzzing performed using Defensics causes the device to become unresponsive, requiring a reboot.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. During execution of the Achilles Comprehensive step limit storm tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. During execution of the Achilles Comprehensive limited storm tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A security issue exists within ArmorStart\u00ae LT that can result in a denial-of-service condition. During execution of the Achilles EtherNet/IP Step Limits Storms tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
\n\nMitigation
There is no patch or upgrade at this time. Rockwell Automation recommends users apply security best practices to mitigate the risk of these vulnerabilities.
Mitigation
See Rockwell Automation's SD1768 advisory for more information.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-29 | \n1 | \nInitial Republication of Rockwell Automation advisory SD1768 | \n
CISA has added one new vulnerability to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThis type of vulnerability is a frequent attack vector for malicious cyber actors and poses significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Thu, 29 Jan 26 12:00:00 +0000", "last_updated": "Thu, 29 Jan 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-029-03", "title": "Rockwell Automation ControlLogix", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-029-03", "summary": "\nSuccessful exploitation of this vulnerability could allow an attacker to cause a denial-of-service condition.
\nThe following versions of Rockwell Automation ControlLogix are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.5 | \nRockwell Automation | \nRockwell Automation ControlLogix | \nMissing Release of Memory after Effective Lifetime | \n
Multiple denial-of-service issues exist in 1756-RM2 and 1756-RM2XT firmware (ControlLogix Redundancy Enhanced Modules). These issues can be triggered through various crafted inputs, including malformed Class 3 messages, memory leak conditions, and other resource exhaustion scenarios. Exploitation may cause the device to become unresponsive and, in some cases, result in a major nonrecoverable fault. Recovery may require a restart.
\n\nMitigation
Rockwell Automation recommends that users upgrade from the 1756-RM2 to 1756-RM3.
Mitigation
If users are unable to upgrade to the 1756-RM3, security best practices should be applied.
Mitigation
See Rockwell Automation's SD1769 advisory for more information.
Relevant CWE: CWE-401 Missing Release of Memory after Effective Lifetime
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-29 | \n1 | \nInitial Republication of Rockwell Automation advisory SD1769 | \n
Newly disclosed vulnerability Common Vulnerabilities and Exposures (CVE)-2026-24858 [Common Weakness Enumeration (CWE)-288: Authentication Bypass Using an Alternate Path or Channel] allows malicious actors with a FortiCloud account and a registered device to log in to separate devices registered to other users in FortiOS, FortiManager, FortiWeb, FortiProxy, and FortiAnalyzer, if FortiCloud single sign on (SSO) is enabled on devices.1
\nUsers are vulnerable to CVE-2026-24858 even if they updated Fortinet devices to address previously disclosed FortiCloud SSO bypass vulnerabilities CVE-2025-59718 and CVE-2025-59719 [CWE-347: Improper Verification of Cryptographic Signature].2 CVE-2025-59718 and CVE-2025-59719 affect FortiOS, FortiWeb, FortiProxy, and FortiSwitch Manager, and allow malicious actors to bypass the SSO login authentication via a crafted Security Assertion Markup Language (SAML) message.3 On Fortinet devices that had been fully upgraded to the latest release addressing CVE-2025-59718 and CVE-2025-59719 at the time of CVE-2026-24858 exploitation, Fortinet observed the following malicious activity:
\nAccording to Fortinet, on Jan. 26, 2026, Fortinet disabled all FortiCloud SSO authentication to mitigate CVE-2026-24858, then reinstated the service on Jan. 27, 2026, with changes to prevent exploitation of vulnerable devices.
\nCISA added CVE-2026-24858 to its Known Exploited Vulnerabilities (KEV) Catalog on Jan. 27, 2026.
\nCISA urges users to check for indicators of compromise on all internet-accessible Fortinet products affected by this vulnerability and immediately apply updates as soon as they are available using Fortinet\u2019s instructions:
\nThe information in this report is being provided \u201cas is\u201d for informational purposes only. CISA does not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favoring by CISA.\u202f
\nSuccessful exploitation of this vulnerability could allow an attacker to perform unauthorized actions on the file system.
\nThe following versions of iba Systems ibaPDA are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.8 | \niba Systems | \niba Systems ibaPDA | \nIncorrect Permission Assignment for Critical Resource | \n
A security issue has been identified in ibaPDA that could allow unauthorized actions on the file system under certain conditions. This may impact the confidentiality, integrity, or availability of the system.
\n\nVendor fix
iba Systems recommends users update to ibaPDA v8.12.1 or a later version.
Mitigation
If Installing the update is not possible, iba Systems recommends users:
Mitigation
Enable User Management:To activate user management, navigate to User Management settings under the Configure option. Set a password for the admin user to enable user management.
Vendor fix
Configure Server Access:To configure, open Server Access Manager (found under Configure in the ibaPDA Client). Set the configuration to restrict access. For example, only 127.0.0.1 (localhost) or specific system IP addresses to communicate with ibaPDA can connect to the ibaPDA Server. (In this example, only connections from localhost are permitted to access ibaPDA.)
Vendor fix
Restrict Connections to Localhost (if ibaPDA is only accessed from the system where it runs):
Vendor fix
Go to I/O Manager, then General, and deactivate the option \"Automatically open necessary ports in Windows Firewall.\" (If this option remains active, after a restart of ibaPDA or a restart for data acquisition, the firewall will be reconfigured automatically.)
Vendor fix
Then, go to Advanced Windows Firewall settings and delete or deactivate all incoming rules for the ibaPDA Client and Server.
Vendor fix
Manually create firewall rules for the connection used for ibaPDA and verify that the correct ports are configured. For assistance with identifying the ports used by the ibaPDA service can be found in the iba Help Center.
Vendor fix
Note: After making the changes, verify that all ibaPDA services are operating as expected and that the data acquisition is functioning correctly.
Relevant CWE: CWE-732 Incorrect Permission Assignment for Critical Resource
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-27 | \n1 | \nInitial Publication | \n
CISA has added one new vulnerability to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThis type of vulnerability is a frequent attack vector for malicious cyber actors and poses significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Tue, 27 Jan 26 12:00:00 +0000", "last_updated": "Tue, 27 Jan 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-027-04", "title": "Johnson Controls Metasys Products", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-027-04", "summary": "\nSuccessful exploitation of this vulnerability could result in remote SQL execution, leading to alteration or loss of data.
\nThe following versions of Johnson Controls Metasys Products are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 10 | \nJohnson Controls | \nJohnson Controls Metasys Products | \nImproper Neutralization of Special Elements used in a Command ('Command Injection') | \n
Under certain circumstances a successful exploitation of this vulnerability could allow remote SQL execution.
\n\nMitigation
Johnson Controls recommends downloading and executing the Metasys patch for GIV-165989 from the License Portal. Login credentials are required.
Mitigation
Johnson Controls advises following the Metasys Release 14 Hardening Guide to ensure each Metasys installation is on a segmented network and not exposed to untrusted networks such as the internet.
Mitigation
Additionally, closing incoming TCP port 1433 can protect against exploitation of this vulnerability.
Mitigation
For more detailed mitigation instructions, visit Johnson Controls Product Security Advisory JCI-PSA-2026-02.
Relevant CWE: CWE-77 Improper Neutralization of Special Elements used in a Command ('Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n10 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-27 | \n1 | \nInitial Republication of Johnson Controls advisory JCI-PSA-2026-02 | \n
MES PCs shipped with Windows 10 come pre-installed with XAMPP. XAMPP is a bundle of third-party open-source applications including the Apache HTTP Server, the MariaDB database and more. From time to time, vulnerabilities in these applications are discovered. These are fixed in newer versions of XAMPP by updating the bundled applications. MES PCs shipped with Windows 10 include a copy of XAMPP which contains around 140 such vulnerabilities listed in this advisory. They can be fixed by replacing XAMPP with Festo Didactic's Factory Control Panel application.
\nThe following versions of Festo Didactic SE MES PC are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.8 | \nFesto Didactic SE | \nFesto Didactic SE MES PC | \nBuffer Over-read, Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting'), Improper Input Validation, Improper Handling of Values, Uncontrolled Resource Consumption, Improper Neutralization of Argument Delimiters in a Command ('Argument Injection'), Double Free, Buffer Copy without Checking Size of Input ('Classic Buffer Overflow'), Use After Free, Exposure of Sensitive Information to an Unauthorized Actor, Out-of-bounds Read, Improper Null Termination, Incorrect Calculation of Buffer Size, Path Traversal: '../filedir', Reachable Assertion, Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection'), Use of Password Hash With Insufficient Computational Effort, Out-of-bounds Write, Incorrect Privilege Assignment, Improper Control of Generation of Code ('Code Injection'), Improper Authentication, Stack-based Buffer Overflow, NULL Pointer Dereference, Missing Initialization of Resource, Null Byte Interaction Error (Poison Null Byte), Improper Restriction of Operations within the Bounds of a Memory Buffer, Improper Preservation of Permissions, Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling'), Integer Overflow or Wraparound, Uncontrolled Recursion, URL Redirection to Untrusted Site ('Open Redirect'), Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting'), Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Free of Memory not on the Heap, Use of Uninitialized Resource, Improper Handling of Invalid Use of Special Elements, Improper Use of Validation Framework | \n
When processing certain files, PHP EXIF extension in versions 7.1.x below 7.1.29, 7.2.x below 7.2.18 and 7.3.x below 7.3.5 can be caused to read past allocated buffer in exif_process_IFD_TAG function. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-126 Buffer Over-read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
In phpMyAdmin before 4.9.11 and 5.x before 5.2.1, an authenticated user can trigger XSS by uploading a crafted .sql file through the drag-and-drop interface.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-79 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.4 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N | \n
Vulnerability in the MySQL Client product of Oracle MySQL (component: C API). Supported versions that are affected are 5.7.32 and prior and 8.0.22 and prior. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Client. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Client.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB v10.2 to v10.6.1 was discovered to contain a segmentation fault via the component Item_subselect::init_expr_cache_tracker.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-229 Improper Handling of Values
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB through 10.5.9 allows an application crash via certain long SELECT DISTINCT statements that improperly interact with storage-engine resource limitations for temporary data structures.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
University of Washington IMAP Toolkit 2007f on UNIX, as used in imap_open() in PHP and other products, launches an rsh command (by means of the imap_rimap function in c-client/imap4r1.c and the tcp_aopen function in osdep/unix/tcp_unix.c) without preventing argument injection, which might allow remote attackers to execute arbitrary OS commands if the IMAP server name is untrusted input (e.g., entered by a user of a web application) and if rsh has been replaced by a program with different argument semantics. For example, if rsh is a link to ssh (as seen on Debian and Ubuntu systems), then the attack can use an IMAP server name containing a \"-oProxyCommand\" argument.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-88 Improper Neutralization of Argument Delimiters in a Command ('Argument Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.7.33 and prior and 8.0.23 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.3.x below 7.3.13 and 7.4.0 on Windows, when supplying custom headers to mail() function, due to mistake introduced in commit 78f4b4a2dcf92ddbccea1bb95f8390a18ac3342e, if the header is supplied in lowercase, this can result in double-freeing certain memory locations.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-415 Double Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
In PHP versions 7.4.x below 7.4.30, 8.0.x below 8.0.20, and 8.1.x below 8.1.7, when pdo_mysql extension with mysqlnd driver, if the third party is allowed to supply host to connect to and the password for the connection, password of excessive length can trigger a buffer overflow in PHP, which can lead to a remote code execution vulnerability.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
MariaDB v10.2 to v10.7 was discovered to contain a segmentation fault via the component sub_select.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-229 Improper Handling of Values
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB v10.2 to v10.7 was discovered to contain a segmentation fault via the component Exec_time_tracker::get_loops/Filesort_tracker::report_use/filesort.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-229 Improper Handling of Values
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB Server v10.6.3 and below was discovered to contain an use-after-free in the component Item_func_in::cleanup(), which is exploited via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
Vulnerability in the MySQL Client product of Oracle MySQL (component: C API). Supported versions that are affected are 5.6.47 and prior, 5.7.29 and prior and 8.0.18 and prior. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Client. Successful attacks of this vulnerability can result in unauthorized read access to a subset of MySQL Client accessible data.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-200 Exposure of Sensitive Information to an Unauthorized Actor
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n3.7 | \nLOW | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N | \n
An issue was discovered in the EXIF component in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. There is an uninitialized read in exif_process_IFD_in_MAKERNOTE because of mishandling the maker_note->offset relationship to value_len.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
In PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0 on Windows, PHP link() function accepts filenames with embedded \\0 byte and treats them as terminating at that byte. This could lead to security vulnerabilities, e.g. in applications checking paths that the code is allowed to access.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-170 Improper Null Termination
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
In PHP versions 7.2.x below 7.2.33, 7.3.x below 7.3.21 and 7.4.x below 7.4.9, while processing PHAR files using phar extension, phar_parse_zipfile could be tricked into accessing freed memory, which could lead to a crash or information disclosure.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n3.6 | \nLOW | \nCVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:L | \n
In PHP versions 7.2.x below 7.2.34, 7.3.x below 7.3.23 and 7.4.x below 7.4.11, when AES-CCM mode is used with openssl_encrypt() function with 12 bytes IV, only first 7 bytes of the IV is actually used. This can lead to both decreased security and incorrect encryption data.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
Use-after-free vulnerability in the phar_rename_archive function in phar_object.c in PHP before 5.5.22 and 5.6.x before 5.6.6 allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors that trigger an attempted renaming of a Phar archive to the name of an existing file.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, core path resolution function allocate buffer one byte too small. When resolving paths with lengths close to system MAXPATHLEN setting, this may lead to the byte after the allocated buffer being overwritten with NUL value, which might lead to unauthorized data access or modification.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-131 Incorrect Calculation of Buffer Size
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.1 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
MariaDB Server v10.6.3 and below was discovered to contain an use-after-free in the component Binary_string::free_buffer() at /sql/sql_string.h.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.3.x below 7.3.31, 7.4.x below 7.4.24 and 8.0.x below 8.0.11, in Microsoft Windows environment, ZipArchive::extractTo may be tricked into writing a file outside target directory when extracting a ZIP file, thus potentially causing files to be created or overwritten, subject to OS permissions.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-24 Path Traversal: '../filedir'
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N | \n
MariaDB Server v10.9 and below was discovered to contain a segmentation fault via the component sql/item_cmpfunc.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.3.x below 7.3.26, 7.4.x below 7.4.14 and 8.0.0, when validating URL with functions like filter_var($url, FILTER_VALIDATE_URL), PHP will accept an URL with invalid password as valid URL. This may lead to functions that rely on URL being valid to mis-parse the URL and produce wrong data as components of the URL.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N | \n
MariaDB Server v10.7 and below was discovered to contain a global buffer overflow in the component decimal_bin_size, which is exploited via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB Server v10.6.5 and below was discovered to contain an use-after-free in the component Item_args::walk_arg, which is exploited via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: Information Schema). Supported versions that are affected are 5.7.32 and prior and 8.0.22 and prior. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized read access to a subset of MySQL Server accessible data.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N | \n
Vulnerability in the MySQL Client product of Oracle MySQL (component: C API). Supported versions that are affected are 5.6.47 and prior, 5.7.29 and prior and 8.0.19 and prior. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Client. Successful attacks of this vulnerability can result in unauthorized read access to a subset of MySQL Client accessible data.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n3.7 | \nLOW | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N | \n
In PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0, PHP DirectoryIterator class accepts filenames with embedded \\0 byte and treats them as terminating at that byte. This could lead to security vulnerabilities, e.g. in applications checking paths that the code is allowed to access.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-170 Improper Null Termination
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
MariaDB Server v10.9 and below was discovered to contain a segmentation fault via the component sql/sql_window.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB Server v10.6.3 and below was discovered to contain an use-after-free in the component my_mb_wc_latin1 at /strings/ctype-latin1.c.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An issue in the component Item_subselect::init_expr_cache_tracker of MariaDB Server v10.6 and below was discovered to allow attackers to cause a Denial of Service (DoS) via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An issue was discovered in phpMyAdmin 5.1 before 5.1.2. An attacker can inject malicious code into aspects of the setup script, which can allow XSS or HTML injection.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-79 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.1 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N | \n
In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, password_verify() function may accept some invalid Blowfish hashes as valid. If such invalid hash ever ends up in the password database, it may lead to an application allowing any password for this entry as valid.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-916 Use of Password Hash With Insufficient Computational Effort
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.2 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N | \n
An issue was discovered in PHP 7.3.x before 7.3.1. An invalid multibyte string supplied as an argument to the mb_split() function in ext/mbstring/php_mbregex.c can cause PHP to execute memcpy() with a negative argument, which could read and write past buffers allocated for the data.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-787 Out-of-bounds Write
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
An issue in the component Arg_comparator::compare_real_fixed of MariaDB Server v10.6.2 and below was discovered to allow attackers to cause a Denial of Service (DoS) via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An issue was discovered in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. Due to the way rename() across filesystems is implemented, it is possible that file being renamed is briefly available with wrong permissions while the rename is ongoing, thus enabling unauthorized users to access the data.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-266 Incorrect Privilege Assignment
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n7.5 | \nHIGH | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
A remote code execution issue was discovered in MariaDB 10.2 before 10.2.37, 10.3 before 10.3.28, 10.4 before 10.4.18, and 10.5 before 10.5.9; Percona Server through 2021-03-03; and the wsrep patch through 2021-03-03 for MySQL. An untrusted search path leads to eval injection, in which a database SUPER user can execute OS commands after modifying wsrep_provider and wsrep_notify_cmd. NOTE: this does not affect an Oracle product.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-94 Improper Control of Generation of Code ('Code Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.2 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H | \n
In PHP versions 7.3.x up to and including 7.3.31, 7.4.x below 7.4.25 and 8.0.x below 8.0.12, when running PHP FPM SAPI with main FPM daemon process running as root and child worker processes running as lower-privileged users, it is possible for the child processes to access memory shared with the main process and write to it, modifying it in a way that would cause the root process to conduct invalid memory reads and writes, which can be used to escalate privileges from local unprivileged user to the root user.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-787 Out-of-bounds Write
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7 | \nHIGH | \nCVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.7.29 and prior and 8.0.19 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server as well as unauthorized update, insert or delete access to some of MySQL Server accessible data.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:L/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DML). Supported versions that are affected are 5.7.33 and prior and 8.0.23 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
Use-after-free vulnerability in the process_nested_data function in ext/standard/var_unserializer.re in PHP before 5.4.39, 5.5.x before 5.5.23, and 5.6.x before 5.6.7 allows remote attackers to execute arbitrary code via a crafted unserialize call that leverages use of the unset function within an __wakeup function, a related issue to CVE-2015-0231.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
An issue was discovered in phpMyAdmin 4.9 before 4.9.8 and 5.1 before 5.1.2. A valid user who is already authenticated to phpMyAdmin can manipulate their account to bypass two-factor authentication for future login instances.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-287 Improper Authentication
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N | \n
Vulnerability in the MySQL Client product of Oracle MySQL (component: C API). Supported versions that are affected are 5.6.47 and prior, 5.7.27 and prior and 8.0.17 and prior. Difficult to exploit vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Client. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Client.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB before 10.6.2 allows an application crash because of mishandling of a pushdown from a HAVING clause to a WHERE clause.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.6.47 and prior, 5.7.28 and prior and 8.0.18 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.3.x below 7.3.16 and 7.4.x below 7.4.4, while using mb_strtolower() function with UTF-32LE encoding, certain invalid strings could cause PHP to overwrite stack-allocated buffer. This could lead to memory corruption, crashes and potentially code execution.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H | \n
In PHP versions 7.3.x below 7.3.29, 7.4.x below 7.4.21 and 8.0.x below 8.0.8, when using URL validation functionality via filter_var() function with FILTER_VALIDATE_URL parameter, an URL with invalid password field can be accepted as valid. This can lead to the code incorrectly parsing the URL and potentially leading to other security implications - like contacting a wrong server or making a wrong access decision.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N | \n
In PHP versions 7.2.x below 7.2.28, 7.3.x below 7.3.15 and 7.4.x below 7.4.3, when using file upload functionality, if upload progress tracking is enabled, but session.upload_progress.cleanup is set to 0 (disabled), and the file upload fails, the upload procedure would try to clean up data that does not exist and encounter null pointer dereference, which would likely lead to a crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-476 NULL Pointer Dereference
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
Function iconv_mime_decode_headers() in PHP versions 7.1.x below 7.1.30, 7.2.x below 7.2.19 and 7.3.x below 7.3.6 may perform out-of-buffer read due to integer overflow when parsing MIME headers. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
When processing certain files, PHP EXIF extension in versions 7.1.x below 7.1.28, 7.2.x below 7.2.17 and 7.3.x below 7.3.4 can be caused to read past allocated buffer in exif_iif_add_value function. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
MariaDB Server v10.9 and below was discovered to contain a use-after-free via the component Binary_string::free_buffer() at /sql/sql_string.h.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0, PHP bcmath extension functions on some systems, including Windows, can be tricked into reading beyond the allocated space by supplying it with string containing characters that are identified as numeric by the OS but aren't ASCII numbers. This can read to disclosure of the content of some memory locations.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N | \n
MariaDB Server v10.9 and below was discovered to contain a segmentation fault via the component sql/item_cmpfunc.h.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB Server v10.7 and below was discovered to contain a segmentation fault via the component sql/sql_class.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An issue was discovered in the EXIF component in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. There is an uninitialized read in exif_process_IFD_in_MAKERNOTE because of mishandling the data_len variable.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-909 Missing Initialization of Resource
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.1.x below 7.1.31, 7.2.x below 7.2.21 and 7.3.x below 7.3.8 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.1 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:H | \n
An issue in the component Used_tables_and_const_cache::used_tables_and_const_cache_join of MariaDB Server v10.7 and below was discovered to allow attackers to cause a Denial of Service (DoS) via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
When using fgetss() function to read data with stripping tags, in PHP versions 7.2.x below 7.2.27, 7.3.x below 7.3.14 and 7.4.x below 7.4.2 it is possible to supply data that will cause this function to read past the allocated buffer. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
In PHP versions 7.2.x below 7.2.34, 7.3.x below 7.3.23 and 7.4.x below 7.4.11, when PHP is processing incoming HTTP cookie values, the cookie names are url-decoded. This may lead to cookies with prefixes like __Host confused with cookies that decode to such prefix, thus leading to an attacker being able to forge cookie which is supposed to be secure. See also CVE-2020-8184 for more information.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N | \n
MariaDB v10.7 was discovered to contain an use-after-poison in in __interceptor_memset at /libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The move_uploaded_file implementation in ext/standard/basic_functions.c in PHP before 5.4.39, 5.5.x before 5.5.23, and 5.6.x before 5.6.7 truncates a pathname upon encountering a \\x00 character, which allows remote attackers to bypass intended extension restrictions and create files with unexpected names via a crafted second argument. NOTE: this vulnerability exists because of an incomplete fix for CVE-2006-7243.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-626 Null Byte Interaction Error (Poison Null Byte)
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
An issue was discovered in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1. Invalid input to the function xmlrpc_decode() can lead to an invalid memory access (heap out of bounds read or read after free). This is related to xml_elem_parse_buf in ext/xmlrpc/libxmlrpc/xml_element.c.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.7.35 and prior and 8.0.26 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server as well as unauthorized update, insert or delete access to some of MySQL Server accessible data.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:L/A:H | \n
MariaDB Server v10.9 and below was discovered to contain a segmentation fault via the component sql/item_subselect.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An issue was discovered in PHP before 5.6.37, 7.0.x before 7.0.31, 7.1.x before 7.1.20, and 7.2.x before 7.2.8. An Integer Overflow leads to a heap-based buffer over-read in exif_thumbnail_extract of exif.c.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n7.5 | \nHIGH | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
Heap-based buffer overflow in the enchant_broker_request_dict function in ext/enchant/enchant.c in PHP before 5.4.38, 5.5.x before 5.5.22, and 5.6.x before 5.6.6 allows remote attackers to execute arbitrary code via vectors that trigger creation of multiple dictionaries.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-119 Improper Restriction of Operations within the Bounds of a Memory Buffer
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
In PHP versions 7.2.x below 7.2.9, 7.3.x below 7.3.16 and 7.4.x below 7.4.4, while parsing EXIF data with exif_read_data() function, it is possible for malicious data to cause PHP to read one byte of uninitialized memory. This could potentially lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.4 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L | \n
MariaDB Server v10.7 and below was discovered to contain a segmentation fault via the component Item_field::used_tables/update_depend_map_for_order.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.2.x below 7.2.28, 7.3.x below 7.3.15 and 7.4.x below 7.4.3, when creating PHAR archive using PharData::buildFromIterator() function, the files are added with default permissions (0666, or all access) even if the original files on the filesystem were with more restrictive permissions. This may result in files having more lax permissions than intended when such archive is extracted.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-281 Improper Preservation of Permissions
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.7.34 and prior and 8.0.25 and prior. Difficult to exploit vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.4 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
An issue was discovered in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1. A heap-based buffer over-read in PHAR reading functions in the PHAR extension may allow an attacker to read allocated or unallocated memory past the actual data when trying to parse the file name, a different vulnerability than CVE-2018-20783. This is related to phar_detect_phar_fname_ext in ext/phar/phar.c.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
exif_process_IFD_in_MAKERNOTE in ext/exif/exif.c in PHP before 5.6.37, 7.0.x before 7.0.31, 7.1.x before 7.1.20, and 7.2.x before 7.2.8 allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via a crafted JPEG file.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n5.5 | \nMEDIUM | \nCVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H | \n
There is an Assertion failure in MariaDB Server v10.9 and below via 'node->pcur->rel_pos == BTR_PCUR_ON' at /row/row0mysql.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB through 10.5.13 allows a ha_maria::extra application crash via certain SELECT statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.7.33 and prior and 8.0.23 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
The GetCode_ function in gd_gif_in.c in GD 2.1.1 and earlier, as used in PHP before 5.5.21 and 5.6.x before 5.6.5, allows remote attackers to cause a denial of service (buffer over-read and application crash) via a crafted GIF image that is improperly handled by the gdImageCreateFromGif function.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-119 Improper Restriction of Operations within the Bounds of a Memory Buffer
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.1 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
Some mod_proxy configurations on Apache HTTP Server versions 2.4.0 through 2.4.55 allow a HTTP Request Smuggling attack. Configurations are affected when mod_proxy is enabled along with some form of RewriteRule or ProxyPassMatch in which a non-specific pattern matches some portion of the user-supplied request-target (URL) data and is then re-inserted into the proxied request-target using variable substitution. For example, something like: RewriteEngine on RewriteRule \"^/here/(.*)\" \"http://example.com:8080/elsewhere?$1\"; [P] ProxyPassReverse /here/ http://example.com:8080/Request splitting/smuggling could result in bypass of access controls in the proxy server, proxying unintended URLs to existing origin servers, and cache poisoning. Users are recommended to update to at least version 2.4.56 of Apache HTTP Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-444 Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
MariaDB v10.5 to v10.7 was discovered to contain an assertion failure at table->get_ref_count() == 0 in dict0dict.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions before 7.4.31, 8.0.24 and 8.1.11, the vulnerability enables network and same-site attackers to set a standard insecure cookie in the victim's browser which is treated as a `__Host-` or `__Secure-` cookie by PHP applications.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N | \n
An issue was discovered in PHP 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.2. dns_get_record misparses a DNS response, which can allow a hostile DNS server to cause PHP to misuse memcpy, leading to read operations going past the buffer allocated for DNS data. This affects php_parserr in ext/standard/dns.c for DNS_CAA and DNS_ANY queries.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n7.5 | \nHIGH | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
Multiple integer overflows in php_zip.c in the zip extension in PHP before 7.0.6 allow remote attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via a crafted call to (1) getFromIndex or (2) getFromName in the ZipArchive class.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-190 Integer Overflow or Wraparound
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, excessive number of parts in HTTP form upload can cause high resource consumption and excessive number of log entries. This can cause denial of service on the affected server by exhausting CPU resources or disk space.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.6.50 and prior, 5.7.32 and prior and 8.0.22 and prior. Difficult to exploit vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.4 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB v10.5 to v10.7 was discovered to contain a segmentation fault via the component st_select_lex_unit::exclude_level.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-229 Improper Handling of Values
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.2.x below 7.2.31, 7.3.x below 7.3.18 and 7.4.x below 7.4.6, when HTTP file uploads are allowed, supplying overly long filenames or field names could lead PHP engine to try to allocate oversized memory storage, hit the memory limit and stop processing the request, without cleaning up temporary files created by upload request. This potentially could lead to accumulation of uncleaned temporary files exhausting the disk space on the target server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L | \n
MariaDB through 10.5.9 allows attackers to trigger a convert_const_to_int use-after-free when the BIGINT data type is used.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L | \n
MariaDB Server v10.6 and below was discovered to contain an use-after-free in the component my_strcasecmp_8bit, which is exploited via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB before 10.6.5 has a sql_lex.cc integer overflow, leading to an application crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-190 Integer Overflow or Wraparound
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB v10.2 to v10.7 was discovered to contain a segmentation fault via the component Item_args::walk_args.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-229 Improper Handling of Values
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
Inconsistent Interpretation of HTTP Requests ('HTTP Request Smuggling') vulnerability in mod_proxy_ajp of Apache HTTP Server allows an attacker to smuggle requests to the AJP server it forwards requests to. This issue affects Apache HTTP Server Apache HTTP Server 2.4 version 2.4.54 and prior versions.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-444 Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H | \n
When using certain mbstring functions to convert multibyte encodings, in PHP versions 7.2.x below 7.2.27, 7.3.x below 7.3.14 and 7.4.x below 7.4.2 it is possible to supply data that will cause function mbfl_filt_conv_big5_wchar to read past the allocated buffer. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
The Apache2 component in PHP before 5.6.38, 7.0.x before 7.0.32, 7.1.x before 7.1.22, and 7.2.x before 7.2.10 allows XSS via the body of a \"Transfer-Encoding: chunked\" request, because the bucket brigade is mishandled in the php_handler function in sapi/apache2handler/sapi_apache2.c.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-79 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n6.1 | \nMEDIUM | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N | \n
An issue was discovered in the EXIF component in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. There is an Invalid Read in exif_process_SOFn.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
MariaDB through 10.5.9 allows an application crash in find_field_in_tables and find_order_in_list via an unused common table expression (CTE).
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
When processing certain files, PHP EXIF extension in versions 7.1.x below 7.1.28, 7.2.x below 7.2.17 and 7.3.x below 7.3.4 can be caused to read past allocated buffer in exif_process_IFD_TAG function. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
MariaDB Server v10.6.3 and below was discovered to contain an use-after-free in the component VDec::VDec at /sql/sql_type.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.3.x below 7.3.15 and 7.4.x below 7.4.3, while extracting PHAR files on Windows using phar extension, certain content inside PHAR file could lead to one-byte read past the allocated buffer. This could potentially lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
MariaDB Server v10.6.3 and below was discovered to contain an use-after-free in the component my_wildcmp_8bit_impl at /strings/ctype-simple.c.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Parser). Supported versions that are affected are 5.7.29 and prior and 8.0.19 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in takeover of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.2 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DML). Supported versions that are affected are 5.7.33 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: C API). Supported versions that are affected are 5.7.36 and prior and 8.0.27 and prior. Difficult to exploit vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.4 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.1.x below 7.1.30, 7.2.x below 7.2.19 and 7.3.x below 7.3.6 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.7.34 and prior and 8.0.25 and prior. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
HTTP Response Smuggling vulnerability in Apache HTTP Server via mod_proxy_uwsgi. This issue affects Apache HTTP Server: from 2.4.30 through 2.4.55. Special characters in the origin response header can truncate/split the response forwarded to the client.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-444 Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Stored Procedure). Supported versions that are affected are 5.6.47 and prior, 5.7.29 and prior and 8.0.19 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB through 10.5.9 allows a sql_parse.cc application crash because of incorrect used_tables expectations.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB v10.4 to v10.8 was discovered to contain a segmentation fault via the component Item_field::fix_outer_field.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-229 Improper Handling of Values
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB v10.2 to v10.7 was discovered to contain a segmentation fault via the component Item_func_in::cleanup/Item::cleanup_processor.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-229 Improper Handling of Values
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.3.x below 7.3.29, 7.4.x below 7.4.21 and 8.0.x below 8.0.8, when using Firebird PDO driver extension, a malicious database server could cause crashes in various database functions, such as getAttribute(), execute(), fetch() and others by returning invalid response data that is not parsed correctly by the driver. This can result in crashes, denial of service or potentially memory corruption.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.9 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.2.x below 7.2.29, 7.3.x below 7.3.16 and 7.4.x below 7.4.4, while using get_headers() with user-supplied URL, if the URL contains zero (\\0) character, the URL will be silently truncated at it. This may cause some software to make incorrect assumptions about the target of the get_headers() and possibly send some information to a wrong server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-170 Improper Null Termination
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:N | \n
In PHP versions before 7.4.31, 8.0.24 and 8.1.11, the phar uncompressor code would recursively uncompress \"quines\" gzip files, resulting in an infinite loop.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-674 Uncontrolled Recursion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB through 10.5.9 allows a set_var.cc application crash via certain uses of an UPDATE statement in conjunction with a nested subquery.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
PHP through 7.0.8 does not attempt to address RFC 3875 section 4.1.18 namespace conflicts and therefore does not protect applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect an application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, as demonstrated by (1) an application that makes a getenv('HTTP_PROXY') call or (2) a CGI configuration of PHP, aka an \"httpoxy\" issue.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-601 URL Redirection to Untrusted Site ('Open Redirect')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.1 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
Prior to Apache HTTP Server 2.4.55, a malicious backend can cause the response headers to be truncated early, resulting in some headers being incorporated into the response body. If the later headers have any security purpose, they will not be interpreted by the client.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-113 Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N | \n
The default soap.wsdl_cache_dir setting in (1) php.ini-production and (2) php.ini-development in PHP through 5.6.7 specifies the /tmp directory, which makes it easier for local users to conduct WSDL injection attacks by creating a file under /tmp with a predictable filename that is used by the get_sdl function in ext/soap/php_sdl.c.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-74 Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n8.8 | \nHIGH | \nCVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
In PHP versions 7.3.x below 7.3.27, 7.4.x below 7.4.15 and 8.0.x below 8.0.2, when using SOAP extension to connect to a SOAP server, a malicious SOAP server could return malformed XML data as a response that would cause PHP to access a null pointer and thus cause a crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-476 NULL Pointer Dereference
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An issue was discovered in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1. xmlrpc_decode() can allow a hostile XMLRPC server to cause PHP to read memory outside of allocated areas in base64_decode_xmlrpc in ext/xmlrpc/libxmlrpc/base64.c.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n7.5 | \nHIGH | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
An issue was discovered in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1. A number of heap-based buffer over-read instances are present in mbstring regular expression functions when supplied with invalid multibyte data. These occur in ext/mbstring/oniguruma/regcomp.c, ext/mbstring/oniguruma/regexec.c, ext/mbstring/oniguruma/regparse.c, ext/mbstring/oniguruma/enc/unicode.c, and ext/mbstring/oniguruma/src/utf32_be.c when a multibyte regular expression pattern contains invalid multibyte sequences.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
MariaDB Server v10.9 and below was discovered to contain a segmentation fault via the component sql/item_func.cc:148.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
MariaDB through 10.5.9 allows an application crash in sub_select_postjoin_aggr for a NULL value of aggr.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-476 NULL Pointer Dereference
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L | \n
In PHP versions 7.4.x below 7.4.28, 8.0.x below 8.0.16, and 8.1.x below 8.1.3, when using filter functions with FILTER_VALIDATE_FLOAT filter and min/max limits, if the filter fails, there is a possibility to trigger use of allocated memory after free, which can result it crashes, and potentially in overwrite of other memory chunks and RCE. This issue affects: code that uses FILTER_VALIDATE_FLOAT with min/max limits.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
In PHP versions 7.4.x below 7.4.30, 8.0.x below 8.0.20, and 8.1.x below 8.1.7, when using Postgres database extension, supplying invalid parameters to the parametrized query may lead to PHP attempting to free memory using uninitialized data as pointers. This could lead to RCE vulnerability or denial of service.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-590 Free of Memory not on the Heap
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.1 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
MariaDB v10.4 to v10.7 was discovered to contain an use-after-poison in prepare_inplace_add_virtual at /storage/innobase/handler/handler0alter.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An issue in the component Create_tmp_table::finalize of MariaDB Server v10.7 and below was discovered to allow attackers to cause a Denial of Service (DoS) via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A carefully crafted If: request header can cause a memory read, or write of a single zero byte, in a pool (heap) memory location beyond the header value sent. This could cause the process to crash. This issue affects Apache HTTP Server 2.4.54 and earlier.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-787 Out-of-bounds Write
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
ext/imap/php_imap.c in PHP 5.x and 7.x before 7.3.0 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via an empty string in the message argument to the imap_mail function.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-476 NULL Pointer Dereference
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A vulnerability was found in PHP where setting the environment variable PHP_CLI_SERVER_WORKERS to a large value leads to a heap buffer overflow.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-119 Improper Restriction of Operations within the Bounds of a Memory Buffer
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.5 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
exif_read_from_impl in ext/exif/exif.c in PHP 7.2.x through 7.2.7 allows attackers to trigger a use-after-free (in exif_read_from_file) because it closes a stream that it is not responsible for closing. The vulnerable code is reachable through the PHP exif_read_data function.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n9.8 | \nCRITICAL | \nCVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
An issue was discovered in the EXIF component in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. There is an uninitialized read in exif_process_IFD_in_TIFF.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-908 Use of Uninitialized Resource
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
An issue in the component my_decimal::operator= of MariaDB Server v10.6.3 and below was discovered to allow attackers to cause a Denial of Service (DoS) via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An issue in the component Field::set_default of MariaDB Server v10.6 and below was discovered to allow attackers to cause a Denial of Service (DoS) via specially crafted SQL statements.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
In PHP versions 7.3.x below 7.3.33, 7.4.x below 7.4.26 and 8.0.x below 8.0.13, certain XML parsing functions, like simplexml_load_file(), URL-decode the filename passed to them. If that filename contains URL-encoded NUL character, this may cause the function to interpret this as the end of the filename, thus interpreting the filename differently from what the user intended, which may lead it to reading a different file than intended.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-159 Improper Handling of Invalid Use of Special Elements
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N | \n
MariaDB Server v10.9 and below was discovered to contain a segmentation fault via the component sql/field_conv.cc.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-1173 Improper Use of Validation Framework
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DML). Supported versions that are affected are 5.6.47 and prior, 5.7.29 and prior and 8.0.19 and prior. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.1.x below 7.1.31, 7.2.x below 7.2.21 and 7.3.x below 7.3.8 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-125 Out-of-bounds Read
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.1 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:H | \n
Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.7.33 and prior and 8.0.23 and prior. Difficult to exploit vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server.
\n\nVendor fix
Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.4 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H | \n
Festo Didactic offers products with security functions that aid the safe operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks from cyber threats, a comprehensive security concept must be implemented and continuously updated. Festo products and services only constitute one part of such a concept. The customer is responsible for preventing unauthorized access to their plants, systems, machines and networks. Systems, machines and components should only be connected to a company's network or the Internet if and as necessary, and only when the suitable security measures (e.g., firewalls and network segmentation, defense-in-depth) are in place. Failure to ensure adequate security measures when connecting the product to the network can result in vulnerabilities which allow unauthorized, remote access to the network - even beyond the product boundaries. This access could be abused to incur a loss of data or manipulate or sabotage systems. Typical forms of attack include but are not limited to: Denial-of-Service (rendering the system temporarily non-functional), remote execution of malicious code, privilege escalation (executing malicious code with higher system privileges than expected), ransomware (encryption of data and demanding payment for decryption). In the context of industrial systems and machines this can also lead to unsafe states, posing a danger to people and equipment. Furthermore, Festo guidelines on suitable security measures should be observed. Festo products and solutions are constantly being developed further in order to make them more secure. Festo strongly recommends that customers install product updates as soon as they become available and always use the latest versions of its products. Any use of product versions that are no longer supported or any failure to install the latest updates may render the customer vulnerable to cyber-attacks.
\nFesto assumes no liability whatsoever for indirect, collateral, accidental or consequential losses that occur by the distribution and/or use of this document or any losses in connection with the distribution and/or use of this document. All information published in this document is provided free of charge and on good faith by Festo. Insofar as permissible by law, however, none of this information shall establish any warranty, guarantee, commitment, or liability on the part of Festo.\\n\\nNote: In no case does this information release the operator or responsible person from the obligation to check the effect on his system or installation before using the information and, in the event of negative consequences, not to use the information.\\n\\nIn addition, the actual general terms, and conditions for delivery, payment and software use of Festo, available under http://www.festo.com and the special provisions for the use of Festo Security Advisory available at https://www.festo.com/psirt shall apply.
\nThe vulnerabilities covered by this advisory have a broad range of impacts ranging from denial-of-service to disclosure or manipulation/deletion of information. Given the intended usage of MES PCs for didactic purposes in controlled lab environments, separate from productive systems, it never comes into contact with sensitive information. Therefore the impact is reduced to limited availability of the system.
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Festo SE & Co. KG FSA-202402 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Festo SE & Co. KG directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2024-02-27 | \n1 | \nInitial version | \n
| 2025-11-04 | \n2 | \nAdjust to VDE template. Add missing CWE-IDs if available. Updated legal disclaimer to add references to special provisions. | \n
| 2025-12-08 | \n3 | \nAdd all missing CWE identifier and CVSS 3.x scores. | \n
| 2026-01-27 | \n4 | \nInitial Republication of Festo SE & Co. KG FSA-202402 advisory | \n
Schneider Electric is aware of multiple vulnerabilities with EmberZNet disclosed by Silicon Labs. Many vendors, including Schneider Electric, use Silicon Labs\u2019 Zigbee processors in their offers. The following have denial of service vulnerabilities: Wiser iTRV, Wiser RTR, Wiser UFH, Wiser Heat Switch, Wiser Boiler Relay, cFMT (Exaact, Elko, Odace, Merten), Wiser Micromodule, Iconic Wiser Connected Smart Dimmer, Iconic Zigbee devices, Wiser Application Modules, Wiser Connected Pushbutton Switch/Dimmer/Shutter controller, Rotary Dimmer, Motion Sensor Dimmer/Switch, Smart socket outlets, and EV socket outlet. See the following table. Failure to apply the mitigations provided below may risk denial of service, which could result in products being unavailable.
\nThe following versions of Schneider Electric Zigbee Products are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 6.5 | \nSchneider Electric | \nSchneider Electric Zigbee Products | \nBuffer Copy without Checking Size of Input ('Classic Buffer Overflow'), Uncontrolled Resource Consumption | \n
A CWE-120: A buffer overflow vulnerability exists that could cause a denial of service when a malicious device joins the network.
\n\nMitigation
Customers should immediately apply the following mitigations to reduce the risk of exploit: To keep your Zigbee network safe and prevent unauthorized access: \u2022 Restrict device access: Do not allow unknown devices to join your network. \u2022 Review hub settings: Check how your Zigbee hub manages device pairing. \u2022 Control network availability: Only open the network when adding new devices and close it immediately after. \u2022 Use install codes and avoid the well-known key: Whenever possible, use unique install codes for added security. Replace default keys with secure, unique keys.
Relevant CWE: CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A CWE-120: A buffer overflow vulnerability exists that could cause a denial of service when a malicious device joins the network.
\n\nMitigation
Customers should immediately apply the following mitigations to reduce the risk of exploit: To keep your Zigbee network safe and prevent unauthorized access: \u2022 Restrict device access: Do not allow unknown devices to join your network. \u2022 Review hub settings: Check how your Zigbee hub manages device pairing. \u2022 Control network availability: Only open the network when adding new devices and close it immediately after. \u2022 Use install codes and avoid the well-known key: Whenever possible, use unique install codes for added security. Replace default keys with secure, unique keys.
Relevant CWE: CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.3 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L | \n
A CWE-120: A buffer overflow vulnerability exists that could cause a denial of service when a malicious device joins the network.
\n\nMitigation
Customers should immediately apply the following mitigations to reduce the risk of exploit: To keep your Zigbee network safe and prevent unauthorized access: \u2022 Restrict device access: Do not allow unknown devices to join your network. \u2022 Review hub settings: Check how your Zigbee hub manages device pairing. \u2022 Control network availability: Only open the network when adding new devices and close it immediately after. \u2022 Use install codes and avoid the well-known key: Whenever possible, use unique install codes for added security. Replace default keys with secure, unique keys.
Relevant CWE: CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.3 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L | \n
A CWE-120: A buffer overflow vulnerability exists that could cause a denial of service when a malicious device joins the network.
\n\nMitigation
Customers should immediately apply the following mitigations to reduce the risk of exploit: To keep your Zigbee network safe and prevent unauthorized access: \u2022 Restrict device access: Do not allow unknown devices to join your network. \u2022 Review hub settings: Check how your Zigbee hub manages device pairing. \u2022 Control network availability: Only open the network when adding new devices and close it immediately after. \u2022 Use install codes and avoid the well-known key: Whenever possible, use unique install codes for added security. Replace default keys with secure, unique keys.
Relevant CWE: CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n3.7 | \nLOW | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L | \n
A CWE-400: Uncontrolled Resource Consumption vulnerability exists that could cause a denial of service when a malicious device joins the network.
\n\nMitigation
Customers should immediately apply the following mitigations to reduce the risk of exploit: To keep your Zigbee network safe and prevent unauthorized access: \u2022 Restrict device access: Do not allow unknown devices to join your network. \u2022 Review hub settings: Check how your Zigbee hub manages device pairing. \u2022 Control network availability: Only open the network when adding new devices and close it immediately after. \u2022 Use install codes and avoid the well-known key: Whenever possible, use unique install codes for added security. Replace default keys with secure, unique keys.
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.8 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:N/I:N/A:H | \n
We strongly recommend the following industry cybersecurity best practices. https://www.se.com/us/en/download/document/7EN52-0390/ * Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network. * Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks. * Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode. * Never connect programming software to any network other than the network intended for that device. * Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks. * Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation. * Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet. * When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices. For more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document.
\nThis document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process. For further information related to cybersecurity in Schneider Electric\u2019s products, visit the company\u2019s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp
\nTHIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND. SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION
\nAt Schneider, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability. We combine world-leading energy technologies, real-time automation, software and services into integrated solutions for Homes, Buildings, Data Centers, Infrastructure and Industries. We are committed to unleash the infinite possibilities of an open, global, innovative community that is passionate with our Meaningful Purpose, Inclusive and Empowered values. www.se.com
\nThese vulnerabilities disclosed by Silicon Labs affect their Zigbee processors, which are used in multiple Schneider Electric's products.
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Schneider Electric CPCERT SEVD-2026-013-03 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Schneider Electric CPCERT directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-13 | \n1 | \nOriginal Release | \n
| 2026-01-27 | \n2 | \nInitial Republication of Schneider Electric CPCERT SEVD-2026-013-03 advisory | \n
CISA has added five new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThese types of vulnerabilities are frequent attack vectors for malicious cyber actors and pose significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Mon, 26 Jan 26 12:00:00 +0000", "last_updated": "Mon, 26 Jan 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/resources-tools/resources/product-categories-technologies-use-post-quantum-cryptography-standards", "title": "Product Categories for Technologies That Use Post-Quantum Cryptography Standards", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/resources-tools/resources/product-categories-technologies-use-post-quantum-cryptography-standards", "summary": "In response to the June 6, 2025, Executive Order (EO) 14306, \u201cSustaining Select Efforts to Strengthen the Nation\u2019s Cybersecurity and Amending Executive Order 13694 and Executive Order 14144,\u201d the Cybersecurity and Infrastructure Security Agency (CISA) is providing and regularly updating the below lists to aid in post-quantum cryptography (PQC) adoption. The lists include hardware and software categories with example types of widely available products that use PQC standards to protect sensitive information.1 The lists focus on categories of available products, typically acquired by the federal government, that utilize cryptographic algorithms. Because PQC-capable products are widely available in the listed categories, organizations should acquire only PQC-capable products when planning acquisitions and procuring products in these categories.
\nThe lists below are CISA\u2019s response to Executive Order (EO) 14306, which instructed:
\nBy December 1, 2025, the Secretary of Homeland Security, acting through the Director of the Cybersecurity and Infrastructure Security Agency (CISA), and in consultation with the Director of the National Security Agency, shall release and thereafter regularly update a list of product categories in which products that support post-quantum cryptography (PQC) are widely available.
\nWhen a particular category offers widely available PQC-capable products, organizations should plan acquisitions to procure only PQC-capable products from that category.
\nThe scope of the lists below includes categories of hardware and software products that are\u2014or are anticipated to be\u2014widely available and use PQC standards.
\nNote: \u201cWidely available\u201d describes products that are generally available in the marketplace, and agencies can acquire them in accordance with their typical procurement policies and procedures.
\nThe categories cover hardware and software products that apply PQC standards for encryption and authentication through the following cryptographic functions:
\nKey establishment is often essential for establishing confidential communication using encryption among two or more parties. Digital signatures are often essential for authenticating the parties participating in a communication and for establishing the authenticity of data, products, and services.
\nAutomated cryptographic discovery and inventory products are out of scope of these lists.
\nRecognizing the global need to support PQC algorithms, product manufacturers are developing new products and updating existing products to incorporate post-quantum cryptographic standards.
\nIn 2016, the National Institute of Standards and Technology (NIST) initiated a process to solicit, evaluate, and standardize one or more quantum-resistant public-key cryptographic algorithms. The ongoing PQC standardization process has produced PQC standards and will likely standardize additional algorithms in the coming years.
\nThe NIST Internal Report (IR) 8547, Transition to Post-Quantum Cryptography Standards, describes NIST\u2019s expected approach to transitioning from quantum-vulnerable cryptographic algorithms to post-quantum digital signature algorithms and key-establishment schemes. The report identifies existing quantum-vulnerable cryptographic standards and the current quantum-resistant standards that organizations will use in the transition. The report informs the efforts and timelines of federal agencies, industry, and standards organizations for transitioning products, services, and infrastructure to PQC. NIST will revise this report and feed into other algorithms- and application-specific guidance for the transition to PQC as necessary to support transition timelines.
\nTable 1 shows three NIST PQC standards along with a recommendation for stateful hash-based signature algorithms that support quantum-resistant standards.
| \n Cryptographic Function \n | \n\n Algorithm Standard \n | \n\n Standard \n | \n
|---|---|---|
| Key Establishment | \nModule-Lattice-Based Key- Encapsulation Mechanism (ML-KEM) | \nFederal Information Processing Standards (FIPS) 203 | \n
| Digital Signature | \nModule-Lattice-Based Digital Signature Algorithm (ML-DSA) | \nFederal Information Processing Standards (FIPS) 204 | \n
| Digital Signature | \nStateless Hash-Based Digital Signature Algorithm (SLH-DSA) | \nFederal Information Processing Standards (FIPS) 205 | \n
| Digital Signature | \nStateful Hash-Based Digital Signature Algorithms: Leighton-Micali Signature Scheme (LMS), Hierarchical Merkle Signature Scheme (HMS), eXtended Merkle Signature Scheme (XMSS), eXtended Merkle Signature Scheme with Multi-Tree (XMSSMT) | \nNISTSP 800-208 | \n
Table 2 details widely available categories with respective types of hardware and software products that use PQC standards to protect sensitive information well into the foreseeable future, including after the advent of a cryptographically relevant quantum computer (CRQC). Organizations building PQC migration plans can use these categories as a guide to assess future technological needs. Once a category is listed as having PQC-capable products widely available, organizations should plan acquisitions to procure only PQC-capable products in that category.4
\nTable 3 does not list categories of PQC-capable products that are currently widely available; instead, it lists product categories where manufacturer implementation and testing of PQC capabilities are encouraged. It is important that the products listed in Table 3 implement PQC for core features and for all secondary functionality, such as for software updates. As the Table 3 product categories mature their capabilities and transition to PQC, CISA will move them from Table 3 to the list in Table 2.
\nTables 2 and 3 consider efforts within the General Services Administration (GSA),5,6 CISA,7 NIST,8 and the National Security Agency (NSA)9. Note: Tables 2 and 3 are not exhaustive lists; CISA will periodically update these tables as needed to cover new examples of widely available products that use PQC standards.
\n\n| \n Product Category* \n | \n\n Example Product Type \n | \n
|---|---|
| Cloud Services | \nPlatform-as-a-service (PaaS), infrastructure-as-a-service (IaaS) | \n
| Collaboration Software | \nChat/messaging | \n
| Web Software | \nWeb browsers, web servers | \n
| Endpoint Security10 | \nData at rest (DAR) security, full disk encryption | \n
* Most of these categories have implemented PQC for key encapsulation and key agreement but have not yet widely implemented PQC for digital signatures and authentication. As a result, these categories are not considered to be fully quantum resistant; CISA includes them on this list because one of their main security services is quantum resistant and Federal Civilian Executive Branch (FCEB) departments and agencies should procure them appropriately.
\n\n| \n Product Category \n | \n\n Example Product Type \n | \n
|---|---|
| Networking Hardware | \nProxy servers, routers, firewalls, switches, appliances | \n
| Networking Software | \nSoftware-defined network (SDN), domain name service (DNS), network operating systems | \n
| Cloud Services | \nSoftware-as-a-service (SaaS) | \n
| Telecommunications Hardware | \nDesk phones, fax machine, voice over IP (VoIP), radio | \n
| Computers (Physical and Virtual) | \nOperating systems, hypervisors, containers | \n
| Computer Peripherals | \nWireless keyboards, wireless headsets | \n
| Storage Area Network | \nAppliances, operating systems, applications | \n
| Identity, Credential, and Access Management (ICAM) Software | \nIdentity management systems, identity provider and federation services, certificate authorities, access brokers, access management software, public key infrastructure (PKI) management software | \n
| Identity, Credential, and Access Management (ICAM) Hardware | \nHardware security modules (HSM), authentication tokens, badges/cards, badge/card readers | \n
| Collaboration Software | \nEmail clients, email servers, conferencing, file sharing | \n
| Data | \nDatabase, Structured Query Language (SQL) server | \n
| Endpoint Security | \nPassword managers, antivirus/anti-malware software, asset management | \n
| Enterprise Security | \nContinuous diagnostics and mitigation (CDM) tools, intrusion detection/monitoring, inspection systems, security information, and event monitoring (SIEM) | \n
Note: The above lists exclude categories of hardware and software products, such as operational technology (OT) and internet of things (IoT) devices, that are not considered traditional IT products. These also should be transitioning to PQC standards as well but are out of scope for these lists.
\n\n
CISA has added one new vulnerability to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThis type of vulnerability is a frequent attack vector for malicious cyber actors and poses significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
\nSuccessful exploitation of these vulnerabilities could allow a low-level user to alter privileges and gain full control to the device.
\nThe following versions of Weintek cMT X Series HMI EasyWeb Service are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 8.3 | \nWeintek | \nWeintek cMT X Series HMI EasyWeb Service | \nExternal Control of Assumed-Immutable Web Parameter, Unverified Password Change | \n
The web application does not sufficiently verify inputs that are assumed to be immutable but are actually externally controllable. A low-privileged user can modify the parameters and potentially manipulate account-level privileges.
\n\nMitigation
Weintek recommends users implement the following mitigation techniques:
Vendor fix
cMT3072XH: Version 20241112
Vendor fix
cMT3072XH(T): Version 20241112
Vendor fix
cMT-SVRX-820: Version 20240919
Vendor fix
cMT-CTRL01: Version 20250827
Mitigation
For more information, see Weintek's planned notice: https://dl.weintek.com/public/Document/TEC/TEC25003E_cMT_EasyWeb_V2_Security_Issues.pdf
Relevant CWE: CWE-472 External Control of Assumed-Immutable Web Parameter
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L | \n
A low-privileged user can bypass account credentials without confirming the user's current authentication state, which may lead to unauthorized privilege escalation.
\n\nMitigation
Weintek recommends users implement the following mitigation techniques:
Vendor fix
cMT3072XH: Version 20241112
Vendor fix
cMT3072XH(T): Version 20241112
Vendor fix
cMT-SVRX-820: Version 20240919
Vendor fix
cMT-CTRL01: Version 20250827
Mitigation
For more information, see Weintek's planned notice: https://dl.weintek.com/public/Document/TEC/TEC25003E_cMT_EasyWeb_V2_Security_Issues.pdf
Relevant CWE: CWE-620 Unverified Password Change
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-22 | \n1 | \nInitial Publication | \n
Successful exploitation of this vulnerability could allow an attacker to cause a failure within the operating system of the machine hosting the ICU tool.
\nThe following versions of Johnson Controls Inc. iSTAR Configuration Utility (ICU) tool are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.1 | \nJohnson Controls Inc. | \nJohnson Controls Inc. iSTAR Configuration Utility (ICU) tool | \nStack-based Buffer Overflow | \n
Under certain circumstances, a successful exploitation of this vulnerability could result in failure within the operating system of the machine hosting the ICU tool.
\n\nMitigation
Johnson Controls Inc. recommends the following:
Vendor fix
Update the iSTAR Configuration Utility (ICU) tool to version 6.9.8
Mitigation
For more detailed mitigation instructions, please see Johnson Controls Product Security Advisory JCI-PSA-2025-08 v1 at the following location: https://www.johnsoncontrols.com/trust-center/cybersecurity/security-advisories
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.1 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-22 | \n1 | \nInitial Publication | \n
Successful exploitation of this vulnerability could enable an attacker to execute arbitrary code.
\nThe following versions of Delta Electronics DIAView are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.8 | \nDelta Electronics | \nDelta Electronics DIAView | \nImproper Neutralization of Special Elements used in a Command ('Command Injection') | \n
DIAView functions can execute shell commands within a project script. If an attacker tricks the victim into running a project containing a malicious script, then arbitrary code can be executed when the malicious project starts.
\n\nVendor fix
Delta Electronics recommends users update to DIAView v4.4 or later.
Mitigation
For more information, see Delta Electronics advisory Delta-PCSA-2026-00002.
Mitigation
Delta Electronics offers users the following general recommendations:
Mitigation
Do not click on untrusted Internet links or open unsolicited attachments in emails.
Mitigation
Avoid exposing control systems and equipment to the Internet.
Mitigation
Place control system networks and remote devices behind firewalls, and isolate them from the business network.
Mitigation
When remote access is required, use a secure access method, such as a virtual private network (VPN).
Mitigation
If you have any product-related support concerns, contact Delta via the portal page for any information or materials you may require.
Relevant CWE: CWE-77 Improper Neutralization of Special Elements used in a Command ('Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.8 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time. This vulnerability is not exploitable remotely.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-22 | \n1 | \nInitial Publication | \n
CISA has added four new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThese types of vulnerabilities are frequent attack vectors for malicious cyber actors and pose significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Thu, 22 Jan 26 12:00:00 +0000", "last_updated": "Thu, 22 Jan 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-022-06", "title": "Hubitat Elevation Hubs", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-022-06", "summary": "\nSuccessful exploitation of this vulnerability could allow an authenticated attacker to escalate their privileges and control devices outside of their authorized scope.
\nThe following versions of Hubitat Elevation Hubs are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.1 | \nHubitat | \nHubitat Elevation Hubs | \nAuthorization Bypass Through User-Controlled Key | \n
An Authorization Bypass Through User-Controlled Key vulnerability in Hubitat Elevation home automation controllers prior to version 2.4.2.157 could allow a remote authenticated user to control connected devices outside of their authorized scope via client-side request manipulation.
\n\nMitigation
Hubitat has released the following for users to implement:
Mitigation
Firmware version 2.4.2.157
Relevant CWE: CWE-639 Authorization Bypass Through User-Controlled Key
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-22 | \n1 | \nInitial Publication | \n
Successful exploitation of this vulnerability could allow an attacker to cause a denial-of-service condition.
\nThe following versions of Rockwell Automation CompactLogix 5370 are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 6.5 | \nRockwell Automation | \nRockwell Automation CompactLogix 5370 | \nImproper Validation of Specified Quantity in Input | \n
The affected product is vulnerable to a denial-of-service issue. The security issue occurs when a malformed CIP forward open message is sent. This could result in a major nonrecoverable fault, which would require a restart to recover.
\n\nMitigation
Rockwell Automation reports that the following versions are fixed:
Mitigation
Versions 37.011 and later
Mitigation
Version 34.016
Mitigation
Version 35.015
Mitigation
Version 36.012
Mitigation
Users using the affected software, who are not able to upgrade to one of the corrected versions, should use our security best practices.
Mitigation
For additional details, refer to advisory SD1770 on the Rockwell Automation security page.
Mitigation
For additional details, refer to advisory SD1770 on the Rockwell Automation security page.
Relevant CWE: CWE-1284 Improper Validation of Specified Quantity in Input
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time. This vulnerability is not exploitable remotely.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-22 | \n1 | \nInitial Republication of Rockwell Automation SD1770 | \n
Successful exploitation of these vulnerabilities could lead to degraded service, a denial-of-service, or unauthorized remote command execution, which could lead to spoofing or a manipulation of charging station statuses.
\nThe following versions of EVMAPA are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nEVMAPA | \nEVMAPA | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration | \n
This vulnerability occurs when a WebSocket endpoint does not enforce proper authentication mechanisms, allowing unauthorized users to establish connections. As a result, attackers can exploit this weakness to gain unauthorized access to sensitive data or perform unauthorized actions. Given that no authentication is required, this can lead to privilege escalation and potentially compromise the security of the entire system.
\n\nVendor fix
CVE-2025-54816: EVMAPA informed CISA some of their charging stations do not allow changes to the authorization key using the Open Charge Point Protocol (OCPP). Currently, charge point operators have the option to connect stations using WebSocket Secure (WSS), and EVMAPA connects stations they supply via their own VPN. For OCPP 2.x and newer stations, EVMAPA plans to implement BASIC authorization control.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
This vulnerability arises because there are no limitations on the number of authentication attempts a user can make. An attacker can exploit this weakness by continuously sending authentication requests, leading to a denial-of-service (DoS) condition. This can overwhelm the authentication system, rendering it unavailable to legitimate users and potentially causing service disruption. This can also allow attackers to conduct brute-force attacks to gain unauthorized access.
\n\nVendor fix
CVE-2025-53968: EVMAPA did not release a statement regarding this vulnerability. Contact EVMAPA directly for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
This vulnerability occurs when the system permits multiple simultaneous connections to the backend using the same charging station ID. This can result in unauthorized access, data inconsistency, or potential manipulation of charging sessions. The lack of proper session management and expiration control allows attackers to exploit this weakness by reusing valid charging station IDs to establish multiple sessions concurrently.
\n\nVendor fix
CVE-2025-55705: EVMAPA informed CISA they have resolved this issue and do not allow simultaneous connection of charging stations with the same CBID.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-22 | \n1 | \nInitial Publication | \n
Schneider Electric is aware of a vulnerability in its EcoStruxureTM Process and EcoStruxure\u2122 Process Expert for AVEVA System Platform products. The EcoStruxureTM Process is a single automation system to engineer, operate, and maintain your entire infrastructure for a sustainable, productive and market-agile plant. The EcoStruxure\u2122 Process Expert for AVEVA System Platform product enables users to achieve operational profitability from design engineering to meeting the demands of modern-day production. It provides an asset centric and object-oriented automation platform to deploy system-wide standards in a digital ecosystem. Failure to apply the Fix/Mitigations provided below may risk modification of the executable binaries, which could result in privilege escalation.
\nThe following versions of Schneider Electric are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.3 | \nSchneider Electric | \nSchneider Electric EcoStruxure Process Expert | \nIncorrect Default Permissions | \n
CWE-276 : Incorrect Default Permissions vulnerability exists that could cause privilege escalation through the reverse shell when one or more executable service binaries are modified in the installation folder by a local user with normal privilege upon service restart.
\n\nVendor fix
Version 2025 of EcoStruxure\u2122 Process Expert includes a fix for this vulnerability and is available for download here: https://www.se.com/ww/en/product-range/65406-ecostruxure-process-expert
Mitigation
Schneider Electric is establishing a remediation plan for all the future versions of EcoStruxure\u2122\u2122 Process Expert for AVEVA System Platform that will include a fix for this vulnerability. We will update this document when the remediation is available. Until then, customers should immediately apply the following mitigations to reduce the risk of exploit: \u2022 Recommended to apply application whitelisting at system level to allow execution of authenticated applications. More details available here: https://www.se.com/ww/en/download/document/EIO0000004778/ \u2022 Recommended to allow access to the system only to the required users.
Relevant CWE: CWE-276 Incorrect Default Permissions
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H | \n
We strongly recommend the following industry cybersecurity best practices. https://www.se.com/us/en/download/document/7EN52-0390/ * Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network. * Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks. * Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode. * Never connect programming software to any network other than the network intended for that device. * Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks. * Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation. * Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet. * When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices. For more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document.
\nThis document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process. For further information related to cybersecurity in Schneider Electric\u2019s products, visit the company\u2019s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp
\nTHIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND. SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION
\nSchneider's purpose is to create Impact by empowering all to make the most of our energy and resources, bridging progress and sustainability for all. We call this Life Is On. Our mission is to be the trusted partner in Sustainability and Efficiency. We are a global industrial technology leader bringing world-leading expertise in electrification, automation and digitization to smart industries, resilient infrastructure, future-proof data centers, intelligent buildings, and intuitive homes. Anchored by our deep domain expertise, we provide integrated end-to-end lifecycle AI enabled Industrial IoT solutions with connected products, automation, software and services, delivering digital twins to enable profitable growth for our customers. We are a people company with an ecosystem of 150,000 colleagues and more than a million partners operating in over 100 countries to ensure proximity to our customers and stakeholders. We embrace diversity and inclusion in everything we do, guided by our meaningful purpose of a sustainable future for all.
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of these vulnerabilities.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Schneider Electric CPCERT SEVD-2026-013-02 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Schneider Electric CPCERT directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-13 | \n1 | \nOriginal Release | \n
| 2026-01-22 | \n2 | \nInitial Republication of Schneider Electric CPCERT SEVD-2026-013-02 advisory | \n
Successful exploitation of these vulnerabilities could allow an attacker to impersonate users, escalate privileges, gain unauthorized access to systems and services, and decrypt sensitive data.
\nThe following versions of AutomationDirect CLICK Programmable Logic Controller are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 6.1 | \nAutomationDirect | \nAutomationDirect CLICK Programmable Logic Controller | \nWeak Encoding for Password, Plaintext Storage of a Password | \n
An attacker with access to the project file could use the exposed credentials to impersonate users, escalate privileges, or gain unauthorized access to systems and services. The absence of robust encryption or secure handling mechanisms increases the likelihood of this type of exploitation, leaving sensitive information more vulnerable.
\n\nMitigation
AutomationDirect recommends that users update CLICK PLUS and firmware to V3.90.
Mitigation
If the update cannot be applied right away, the following compensating controls are recommended until the upgrade can be performed:
Mitigation
Network Isolation \u2013 Disconnect the CLICK PLUS PLC from external networks (e.g., the internet or corporate LAN) to reduce exposure.
Mitigation
Secure Communications \u2013 Use only trusted, dedicated internal networks or air-gapped systems for device communication.
Mitigation
Access Control \u2013 Restrict both physical and logical access to authorized personnel only.
Mitigation
Application Whitelisting \u2013 Configure whitelisting so that only trusted, pre-approved applications are allowed to run. Block any unauthorized software.
Mitigation
Endpoint Protection \u2013 Use antivirus or EDR tools and configure host-based firewalls to block unauthorized access attempts.
Mitigation
Logging & Monitoring \u2013 Enable and regularly review system logs to detect suspicious or unauthorized activity.
Mitigation
Backup & Recovery \u2013 Maintain secure, tested backups of the PLC and its configurations to minimize downtime in case of an incident.
Mitigation
Ongoing Risk Assessment \u2013 Continuously evaluate risks associated with running outdated firmware and adjust compensating measures accordingly.
Relevant CWE: CWE-261 Weak Encoding for Password
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.1 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:N | \n
An attacker could decrypt sensitive data, impersonate legitimate users or devices, and potentially gain access to network resources for lateral attacks.
\n\nMitigation
AutomationDirect recommends that users update CLICK PLUS and firmware to V3.90.
Mitigation
If the update cannot be applied right away, the following compensating controls are recommended until the upgrade can be performed:
Mitigation
Network Isolation \u2013 Disconnect the CLICK PLUS PLC from external networks (e.g., the internet or corporate LAN) to reduce exposure.
Mitigation
Secure Communications \u2013 Use only trusted, dedicated internal networks or air-gapped systems for device communication.
Mitigation
Access Control \u2013 Restrict both physical and logical access to authorized personnel only.
Mitigation
Application Whitelisting \u2013 Configure whitelisting so that only trusted, pre-approved applications are allowed to run. Block any unauthorized software.
Mitigation
Endpoint Protection \u2013 Use antivirus or EDR tools and configure host-based firewalls to block unauthorized access attempts.
Mitigation
Logging & Monitoring \u2013 Enable and regularly review system logs to detect suspicious or unauthorized activity.
Mitigation
Backup & Recovery \u2013 Maintain secure, tested backups of the PLC and its configurations to minimize downtime in case of an incident.
Mitigation
Ongoing Risk Assessment \u2013 Continuously evaluate risks associated with running outdated firmware and adjust compensating measures accordingly.
Relevant CWE: CWE-256 Plaintext Storage of a Password
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.1 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time. These vulnerabilities are not exploitable remotely.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-22 | \n1 | \nInitial Publication | \n
CISA has added one new vulnerability to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThis type of vulnerability is a frequent attack vector for malicious cyber actors and poses significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Wed, 21 Jan 26 12:00:00 +0000", "last_updated": "Wed, 21 Jan 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-020-01", "title": "Schneider Electric EcoStruxure Foxboro DCS", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-020-01", "summary": "\nSchneider Electric is aware of a vulnerability disclosed by INTEL used in the EcoStruxure\u2122 Foxboro DCS product formerly known as Foxboro Evo Process Automation System and I/A Series. The [EcoStruxure\u2122 Foxboro DCS product](https://www.se.com/ww/en/product-range/63680-ecostruxure-foxboro-dcs/#overview) is an innovative family of fault-tolerant, highly available control components, which consolidates critical information and elevates staff capabilities to ensure flawless, continuous plant operation. Failure to apply the remediations provided below may risk allowing an authenticated user to potentially enable information disclosure via a side channel with local access, which could result in loss of system functionality or unauthorized access to system functions.
\nThe following versions of Schneider Electric EcoStruxure Foxboro DCS are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 6.5 | \nSchneider Electric | \nSchneider Electric EcoStruxure Foxboro DCS | \nExposure of Sensitive Information to an Unauthorized Actor | \n
A vulnerability disclosed by INTEL in Intel Xeon Silver 4110 and Intel Xeon W-2123 and prior impact Schneider Electric EcoStruxure\u2122 Foxboro DCS V91 DCS Virtualization Server and H92 DCS Standard Workstation.
\n\nVendor fix
Upgrade to the latest Foxboro server (V95) and workstations (Dell D96): Please contact your local Service Representative or Schneider Electric Process Automation Global Customer Support Center for information on how to migrate to new hardware. https://pasupport.schneider-electric.com/home2020.asp?code=i1swrtYD1O7YcWYkLo5iZJHxEEY9U-agDBBtcLSP7EXks
Mitigation
If customers choose not to apply the remediation provided above, they should immediately apply the following mitigations to reduce the risk of exploit: The BIOS, OS security patches are applied to significantly reduce the exploit possibility. Additional information is available here: https://se.my.site.com/PAkb/s/article/KA000127385 Several layers of defense-in-depth mechanisms available in the recommended security architecture of DCS system, including the computers themselves, and by following the General Security Recommendations specified below mitigate this vulnerability. https://pasupport.schneider-electric.com/Content/Documents/IASeries/b0700_lastrev/b0700hz_f.pdf
Relevant CWE: CWE-200 Exposure of Sensitive Information to an Unauthorized Actor
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.0 | \n6.5 | \nMEDIUM | \nCVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N | \n
We strongly recommend the following industry cybersecurity best practices. * Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network. * Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks. * Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode. * Never connect programming software to any network other than the network intended for that device. * Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks. * Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation. * Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet. * When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices. For more information refer to the Schneider Electric [Recommended Cybersecurity Best Practices](https://www.se.com/us/en/download/document/7EN52-0390/) document.
\nThis document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process. For further information related to cybersecurity in Schneider Electric's products, visit the company's cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp
\nTHIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND. SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION
\nSchneider's purpose is to create Impact by empowering all to make the most of our energy and resources, bridging progress and sustainability for all. We call this Life Is On. Our mission is to be the trusted partner in Sustainability and Efficiency. We are a global industrial technology leader bringing world-leading expertise in electrification, automation and digitization to smart industries, resilient infrastructure, future-proof data centers, intelligent buildings, and intuitive homes. Anchored by our deep domain expertise, we provide integrated end-to-end lifecycle AI enabled Industrial IoT solutions with connected products, automation, software and services, delivering digital twins to enable profitable growth for our customers. We are a people company with an ecosystem of 150,000 colleagues and more than a million partners operating in over 100 countries to ensure proximity to our customers and stakeholders. We embrace diversity and inclusion in everything we do, guided by our meaningful purpose of a sustainable future for all. www.se.com
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of these vulnerabilities.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Schneider Electric CPCERT SEVD-2025-343-01 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Schneider Electric CPCERT directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2025-12-09 | \n1 | \nOriginal Release | \n
| 2026-01-20 | \n2 | \nInitial Republication of Schneider Electric CPCERT SEVD-2025-343-01 advisory | \n
Successful exploitation of these vulnerabilities may allow an attacker to access sensitive information stored in variables within the ADI server.
\nThe following versions of Rockwell Automation Verve Asset Manager are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.9 | \nRockwell Automation | \nRockwell Automation Verve Asset Manager | \nInsecure Storage of Sensitive Information, Cleartext Storage of Sensitive Information | \n
A security issue was discovered within the legacy ADI server component of Verve Asset Manager, where unencrypted sensitive data was stored in environment variables. This component was retired and became optional beginning with the 1.36 release in 2024.
\n\nMitigation
Rockwell Automation reports that the issue was resolved in version 1.42, and the component has been optional since version 1.36. Rockwell Automation recommends updating to the latest available version.
Mitigation
For additional details, refer to the advisory on the Rockwell Automation security page.
Mitigation
For further assistance, contact Rockwell Automation TechConnect for help.
Relevant CWE: CWE-922 Insecure Storage of Sensitive Information
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.2 | \nHIGH | \nCVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:N | \n
A security issue was discovered within the legacy Ansible playbook component of Verve Asset Manager. The issue occurred because unencrypted sensitive information was incorrectly stored during playbook execution. This component was retired and became optional starting with the 1.36 release in 2024.
\n\nMitigation
Rockwell Automation reports that the issue was resolved in version 1.42, and the component has been optional since version 1.36. Rockwell Automation recommends updating to the latest available version.
Mitigation
For additional details, refer to the advisory on the Rockwell Automation security page.
Mitigation
For further assistance, contact Rockwell Automation TechConnect for help.
Relevant CWE: CWE-312 Cleartext Storage of Sensitive Information
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.9 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:L | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as virtual private networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-20 | \n1 | \nInitial Republication of Rockwell Automation's security advisory | \n
Schneider Electric is aware of multiple vulnerabilities disclosed on CODESYS runtime system V3 communication server. Many vendors, including Schneider Electric, embed CODESYS in their offers. If successfully exploited, these vulnerabilities could result in a denial of service or, in some cases, in remote code execution on PacDrive controllers, Modicon Controllers M241 / M251 / M262 / M258 / LMC058 / LMC078 / M218 , HMISCU, the Simulation Runtime SoftSPS from EcoStruxure Machine Expert and EcoStruxure Microgrid Operation products. Failure to apply the mitigations provided below may result in denial of service and/or arbitrary remote code execution.
\nThe following versions of Schneider Electric devices using CODESYS Runtime are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 8.8 | \nSchneider Electric | \nSchneider Electric devices using CODESYS Runtime | \nImproper Restriction of Operations within the Bounds of a Memory Buffer, Improper Validation of Integrity Check Value, Improper Validation of Consistency within Input, Out-of-bounds Write, Stack-based Buffer Overflow, Untrusted Pointer Dereference, Improper Input Validation, Files or Directories Accessible to External Parties, Uncontrolled Search Path Element, Improper Enforcement of Message Integrity During Transmission in a Communication Channel, Improper Restriction of Excessive Authentication Attempts, Exposure of Resource to Wrong Sphere | \n
In addition to the functionality described above, there are memory access functions that allow the PLC application code to read or write memory. These are not limited to the data memories that are assigned to it or allocated by it. For this reason, the PLC application code can potentially access the entire RAM memory of the CODESYS Control runtime process surrounding it. This could allow PLC programmers who have successfully authenticated themselves at the controller to execute PLC application code that can modify itself or read or write sensitive data of the CODESYS Control runtime process.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
No fix planned
Schneider Electric\u00b4s Modicon LMC078 controllers have reached end of their life and are no longer commercially available. They have been replaced by the Modicon M262 controllers. We recommend our customers to migrate to the latest offer. Please contact your local Schneider Electric technical support for more information.
No fix planned
Schneider Electric\u2019s Modicon M218 controllers have reached their end of life and are no longer commercially available. They have been replaced by the Modicon Easy M200 and Modicon M241 controllers. We recommend our customers to migrate to the latest offer. Please contact your local Schneider Electric technical support for more information.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-119 Improper Restriction of Operations within the Bounds of a Memory Buffer
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
The PLC application code executed by the CODESYS Control Runtime contains a checksum. This enables the CODESYS development system to check at login whether its loaded project matches the PLC application code executed on the controller. This checksum is not sufficient to reliably detect PLC application code that has been modified in memory or boot application files that have been manipulated.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
No fix planned
Schneider Electric\u00b4s Modicon LMC078 controllers have reached end of their life and are no longer commercially available. They have been replaced by the Modicon M262 controllers. We recommend our customers to migrate to the latest offer. Please contact your local Schneider Electric technical support for more information.
No fix planned
Schneider Electric\u2019s Modicon M218 controllers have reached their end of life and are no longer commercially available. They have been replaced by the Modicon Easy M200 and Modicon M241 controllers. We recommend our customers to migrate to the latest offer. Please contact your local Schneider Electric technical support for more information.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-354 Improper Validation of Integrity Check Value
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N | \n
After successful authentication, specific crafted communication requests with inconsistent content can cause the CmpFiletransfer component to read internally from an invalid address, potentially leading to a denial-of-service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-1288 Improper Validation of Consistency within Input
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpApp component to write attacker-controlled data to memory, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-787 Out-of-bounds Write
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpApp component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpApp component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpTraceMgr component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpTraceMgr component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpTraceMgr component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpTraceMgr component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpTraceMgr component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpTraceMgr component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpTraceMgr component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpTraceMgr component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpAppForce component to write attacker-controlled data to stack, which can lead to a denial-of-service condition, memory overwriting, or remote code execution.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H | \n
After successful authentication, specific crafted communication requests with inconsistent content can cause the CmpApp/CmpAppBP/CmpAppForce components to read internally from an invalid address, potentially leading to a denial-of-service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-1288 Improper Validation of Consistency within Input
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication, specific crafted communication requests can cause the CmpFiletransfer component to dereference addresses provided by the request for internal read access, which can lead to a denial-of-service situation.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-822 Untrusted Pointer Dereference
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
Crafted communication requests can cause the affected products to read internally from an invalid address, potentially leading to a denial-of-service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-1288 Improper Validation of Consistency within Input
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpApp component to read internally from an invalid address, potentially leading to a denial-ofservice condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpApp component to read internally from an invalid address, potentially leading to a denial-ofservice condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpApp component to read internally from an invalid address, potentially leading to a denial-ofservice condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpApp component to read internally from an invalid address, potentially leading to a denial-ofservice condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpApp component to read internally from an invalid address, potentially leading to a denial-ofservice condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpApp component to read internally from an invalid address, potentially leading to a denial-ofservice condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specially crafted communication requests can utilize the CmpApp component to download files with any file extensions to the controller. In contrast to the regular file download via CmpFileTransfer, no filtering of certain file types is performed here. As a result, the integrity of the CODESYS control runtime system may be compromised by the files loaded onto the controller.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-552 Files or Directories Accessible to External Parties
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpAppBP component to read internally from an invalid address, potentially leading to a denial-of service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpAppBP component to read internally from an invalid address, potentially leading to a denial-of service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpAppBP component to read internally from an invalid address, potentially leading to a denial-of service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpAppBP component to read internally from an invalid address, potentially leading to a denial-of service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpAppBP component to read internally from an invalid address, potentially leading to a denial-of service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests can cause the CmpAppBP component to overwrite a heap-based buffer, which can lead to a denial-of-service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-787 Out-of-bounds Write
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpAppForce component to read internally from an invalid address, potentially leading to a denial-of service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
After successful authentication as a user, specific crafted communication requests with inconsistent content can cause the CmpAppForce component to read internally from an invalid address, potentially leading to a denial-of service condition.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-20 Improper Input Validation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H | \n
The CODESYS Development System is vulnerable to the execution of malicious binaries from the current working directory.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-427 Uncontrolled Search Path Element
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H | \n
The Notification Center of the CODESYS Development System receives messages without ensuring that the message was not modified during transmission. This finally enables MITMs code execution when the user clicks the Learn More button.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-924 Improper Enforcement of Message Integrity During Transmission in a Communication Channel
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H | \n
The Notification Center of the CODESYS Development System receives messages without ensuring that the message was not modified during transmission. This finally enables MITMs code execution when the user clicks the Learn More button.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n3.3 | \nLOW | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N | \n
CODESYS Scripting executes potentially malicious scripts saved by another user.
\n\nVendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer. In order to complete the update, connect to Harmony HMI and download the project file using Vijeo Designer v6.3.1.
Vendor fix
Modicon Controller M241 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M241 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M251 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M251 to the latest Firmware and preform reboot.
Vendor fix
Modicon Controller M262 Firmware delivered with Machine Expert v2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to v2.2 of Machine Expert. Update Modicon Controller M262 to the latest firmware and preform reboot.
No fix planned
Schneider Electric\u2019s Magelis XBT series have reached their end of commercialization. Magelis XBTGT/XBTGK offers have been replaced by HMIGTO/HMIGTU/HMIGK. We recommend our customers to migrate to the latest offers. For Magelis XBT series that haven't been replaced, please contact your local Schneider Electric technical support for more information.
Vendor fix
PacDrive 3 Controllers LMC Eco/Pro/Pro2 Firmware delivered with Machine Expert V2.2 includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/2226-ecostruxure-machine-expert-software/ On the engineering workstation, update to V2.2 of Machine Expert. Update PacDrive 3 Controllers: LMC Eco/Pro/Pro2 to the latest Firmware and preform reboot.
Vendor fix
Version 6.3.1 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeodesigner-hmi-software/#software-and-firmware On the engineering workstation, update to v6.3.1 of Vijeo Designer.
Vendor fix
SoftSPS component has been removed from Machine Expert V2.2. Machine Expert can be updated through the Schneider Electric Software Update (SESU) application.
Mitigation
\u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use. \u2022 Use encrypted communication links. \u2022 The \u201cCybersecurity Guidelines for EcoStruxure Machine Expert, Modicon and PacDrive Controllers and Associated Equipment\u201d provide mitigations through the activation of project encryption in the Enhanced Security Settings, chapter https://download.schneiderelectric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000004242.00.pdf&p_Doc_Ref=EIO0000004242. \u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/1105.
Mitigation
\u2022 Enable the optional \u2018Implicit Checks\u2019 on logic applications. \u2022 Avoid use of the POINTER data type and MEMMOVE instructions, especially on untrusted inputs. \u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside. \u2022 Use firewalls to protect and separate the control system network from other networks. \u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection. To ensure you are informed of all updates, including details on affected products and remediation plans, subscribe to Schneider Electric\u2019s security notification service here: https://www.se.com/en/work/support/cybersecurity/securitynotifications.jsp
Vendor fix
Version 3.1.5.82 includes a fix for this vulnerability and can be download here: https://www.se.com/ww/en/product-range/268959560-easy-modicon-m310 As an alternative, contact your Schneider Electric Customer Care Center to obtain the firmware. To complete the update, connect to M310 and download the firmware using EcoStruxureTM Motion Expert.
Vendor fix
Version 6.3 HF3 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Hot Fix. For additional detail please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 HF3 of Vijeo Designer.
Vendor fix
Vijeo Designer Basic v2.0 HotFix 2 includes a fix for this vulnerability. Please contact your Schneider Electric Customer Care Center to obtain the installer. To complete the update, connect to Harmony HMI and download the firmware using Vijeo Designer Basic.
Vendor fix
Version 6.3 SP2 of Vijeo Designer includes a fix for this vulnerability and can be updated through the Schneider Electric Software Update (SESU) application. https://www.se.com/ww/en/product-range/1054-vijeo-designer-hmi-software/#software-and-firmware As an alternative, please contact your Schneider Electric Customer Care Center to obtain the Fix. For additional details, please refer to the supplied help file in Hot Fix. On the engineering workstation, update to v6.3 SP2 of Vijeo Designer.
Mitigation
Customers should immediately apply the following mitigations to reduce the risk of exploitation: \u2022 Ensure usage of user management and password features. User rights are enabled by default and forced to create a strong password at first use.\u2022 Restrict access to programming ports, typically UDP/1740, TCP/11740 and TCP/484.\u2022 Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside.\u2022 Use firewalls to protect and separate the control system network from other networks.\u2022 Use VPN (Virtual Private Networks) tunnels if remote access is required. \u2022 Limit the access to both development and control system by physical means, operating system features, etc. \u2022 Protect both development and control system by using up to date malware protection.
Relevant CWE: CWE-668 Exposure of Resource to Wrong Sphere
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H | \n
We strongly recommend the following industry cybersecurity best practices. https://www.se.com/us/en/download/document/7EN52-0390/ * Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network. * Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks. * Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode. * Never connect programming software to any network other than the network intended for that device. * Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks. * Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation. * Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet. * When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices. For more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document.
\nThis document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process. For further information related to cybersecurity in Schneider Electric\u2019s products, visit the company\u2019s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp
\nTHIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND. SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION
\nSchneider\u2019s purpose is to create Impact by empowering all to make the most of our energy and resources, bridging progress and sustainability for all. We call this Life Is On. Our mission is to be the trusted partner in Sustainability and Efficiency. We are a global industrial technology leader bringing world-leading expertise in electrification, automation and digitization to smart industries, resilient infrastructure, future-proof data centers, intelligent buildings, and intuitive homes. Anchored by our deep domain expertise, we provide integrated end-to-end lifecycle AI enabled Industrial IoT solutions with connected products, automation, software and services, delivering digital twins to enable profitable growth for our customers. We are a people company with an ecosystem of 150,000 colleagues and more than a million partners operating in over 100 countries to ensure proximity to our customers and stakeholders. We embrace diversity and inclusion in everything we do, guided by our meaningful purpose of a sustainable future for all.
\nVulnerabilities disclosed by CODESYSTM group in the CODESYS Runtime and Simulation Runtime impact Schneider Electric controller products and software. Additional information about the vulnerabilities can be found in the CODESYSTM Advisories at: Advisory 2023-02 \u2022 Advisory 2023-03 \u2022 Advisory 2023-04 \u2022 Advisory 2023-05 \u2022 Advisory 2023-06 \u2022 Advisory 2023-07 \u2022 Advisory 2023-08 \u2022 Advisory 2023-09
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Schneider Electric CPCERT SEVD-2023-192-04 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Schneider Electric CPCERT directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2023-07-11 | \n1 | \nOriginal Release | \n
| 2023-08-08 | \n2 | \nNew CODESYS advisories 2023-04 to 2023-09 added. Additional impacted product: Harmony and Easy Harmony, Vijeo Designer embedded in EcoStruxure Machine Expert. | \n
| 2024-01-09 | \n3 | \nRemediations added for different products. | \n
| 2024-03-12 | \n4 | \nA remediation is now available for HMIGK/HMIGTO/HMIGTU/HMIGTUX/HMISTU series | \n
| 2024-04-09 | \n5 | \nA remediation is now available for Easy Harmony HMIET6/HMIFT6, and Magelis HMIGXU series | \n
| 2024-06-11 | \n6 | \nEasy Modicon M310 is added to the list of products impacted | \n
| 2025-08-12 | \n7 | \nRemediations are available for Harmony iPC series and Harmony P6 series with Vijeo Designer. | \n
| 2025-11-11 | \n8 | \nRemediation is available for Easy Modicon M310. | \n
| 2025-12-09 | \n9 | \nReplaced advisory IDs with CVE IDs. Added vulnerability details, including CVE descriptions, CWE identifiers, CVSS scores, and vector strings. Corrected mappings of affected and fixed products for each CVE. | \n
| 2026-01-20 | \n10 | \nInitial Republication of Schneider Electric CPCERT SEVD-2023-192-04 advisory | \n
Successful exploitation of these vulnerabilities could enable an attacker to execute remote code, perform SQL injection, escalate privileges, or access sensitive information.
\nThe following versions of AVEVA Process Optimization are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 10 | \nAVEVA | \nAVEVA Process Optimization | \nImproper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection'), Uncontrolled Search Path Element, Missing Authorization, Use of Potentially Dangerous Function, Cleartext Transmission of Sensitive Information | \n
The vulnerability, if exploited, could allow an unauthenticated miscreant to achieve remote code execution under OS System privileges of \"taoimr\" service, potentially resulting in complete compromise of the Model Application Server.
\n\nMitigation
AVEVA recommends users take the following action:
Vendor fix
Update to AVEVA Process Optimization v2025
Mitigation
AVEVA alternatively recommends the following actions users can take to mitigate risk:
Vendor fix
Apply Host and/or Network firewall rules restricting the taoimr service to accept traffic only from trusted source(s). By default, AVEVA Process Optimization listens on port 8888/8889(TLS). Please refer to the AVEVA Process Optimization Installation Guide for additional details on ports configuration.
Mitigation
Apply ACLs to the installation and data folders, limiting write-access to trusted users only.
Vendor fix
Maintain a trusted chain-of-custody on Process Optimization project files during creation, modification, distribution, backups, and use.
Mitigation
For more information, please Aveva's security bulletin AVEVA-2026-001.
Relevant CWE: CWE-94 Improper Control of Generation of Code ('Code Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n10 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H | \n
The vulnerability, if exploited, could allow an authenticated miscreant (OS Standard User) to tamper with TCL Macro scripts and escalate privileges to OS System, potentially resulting in complete compromise of the Model Application Server.
\n\nMitigation
AVEVA recommends users take the following action:
Vendor fix
Update to AVEVA Process Optimization v2025
Mitigation
AVEVA alternatively recommends the following actions users can take to mitigate risk:
Vendor fix
Apply Host and/or Network firewall rules restricting the taoimr service to accept traffic only from trusted source(s). By default, AVEVA Process Optimization listens on port 8888/8889(TLS). Please refer to the AVEVA Process Optimization Installation Guide for additional details on ports configuration.
Mitigation
Apply ACLs to the installation and data folders, limiting write-access to trusted users only.
Vendor fix
Maintain a trusted chain-of-custody on Process Optimization project files during creation, modification, distribution, backups, and use.
Mitigation
For more information, please Aveva's security bulletin AVEVA-2026-001.
Relevant CWE: CWE-94 Improper Control of Generation of Code ('Code Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H | \n
The vulnerability, if exploited, could allow an authenticated miscreant (Process Optimization Standard User) to tamper with queries in Captive Historian and achieve code execution under SQL Server administrative privileges, potentially resulting in complete compromise of the SQL Server.
\n\nMitigation
AVEVA recommends users take the following action:
Vendor fix
Update to AVEVA Process Optimization v2025
Mitigation
AVEVA alternatively recommends the following actions users can take to mitigate risk:
Vendor fix
Apply Host and/or Network firewall rules restricting the taoimr service to accept traffic only from trusted source(s). By default, AVEVA Process Optimization listens on port 8888/8889(TLS). Please refer to the AVEVA Process Optimization Installation Guide for additional details on ports configuration.
Mitigation
Apply ACLs to the installation and data folders, limiting write-access to trusted users only.
Vendor fix
Maintain a trusted chain-of-custody on Process Optimization project files during creation, modification, distribution, backups, and use.
Mitigation
For more information, please Aveva's security bulletin AVEVA-2026-001.
Relevant CWE: CWE-89 Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.4 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:N | \n
The vulnerability, if exploited, could allow an authenticated miscreant (OS Standard User) to trick Process Optimization services into loading arbitrary code and escalate privileges to OS System, potentially resulting in complete compromise of the Model Application Server.
\n\nMitigation
AVEVA recommends users take the following action:
Vendor fix
Update to AVEVA Process Optimization v2025
Mitigation
AVEVA alternatively recommends the following actions users can take to mitigate risk:
Vendor fix
Apply Host and/or Network firewall rules restricting the taoimr service to accept traffic only from trusted source(s). By default, AVEVA Process Optimization listens on port 8888/8889(TLS). Please refer to the AVEVA Process Optimization Installation Guide for additional details on ports configuration.
Mitigation
Apply ACLs to the installation and data folders, limiting write-access to trusted users only.
Vendor fix
Maintain a trusted chain-of-custody on Process Optimization project files during creation, modification, distribution, backups, and use.
Mitigation
For more information, please Aveva's security bulletin AVEVA-2026-001.
Relevant CWE: CWE-427 Uncontrolled Search Path Element
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H | \n
The vulnerability, if exploited, could allow an authenticated miscreant (OS Standard User) to tamper with Process Optimization project files, embed code, and escalate their privileges to the identity of a victim user who subsequently interacts with the project files.
\n\nMitigation
AVEVA recommends users take the following action:
Vendor fix
Update to AVEVA Process Optimization v2025
Mitigation
AVEVA alternatively recommends the following actions users can take to mitigate risk:
Vendor fix
Apply Host and/or Network firewall rules restricting the taoimr service to accept traffic only from trusted source(s). By default, AVEVA Process Optimization listens on port 8888/8889(TLS). Please refer to the AVEVA Process Optimization Installation Guide for additional details on ports configuration.
Mitigation
Apply ACLs to the installation and data folders, limiting write-access to trusted users only.
Vendor fix
Maintain a trusted chain-of-custody on Process Optimization project files during creation, modification, distribution, backups, and use.
Mitigation
For more information, please Aveva's security bulletin AVEVA-2026-001.
Relevant CWE: CWE-862 Missing Authorization
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.1 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:L | \n
The vulnerability, if exploited, could allow an authenticated miscreant (Process Optimization Designer User) to embed OLE objects into graphics, and escalate their privileges to the identity of a victim user who subsequently interacts with the graphical elements.
\n\nMitigation
AVEVA recommends users take the following action:
Vendor fix
Update to AVEVA Process Optimization v2025
Mitigation
AVEVA alternatively recommends the following actions users can take to mitigate risk:
Vendor fix
Apply Host and/or Network firewall rules restricting the taoimr service to accept traffic only from trusted source(s). By default, AVEVA Process Optimization listens on port 8888/8889(TLS). Please refer to the AVEVA Process Optimization Installation Guide for additional details on ports configuration.
Mitigation
Apply ACLs to the installation and data folders, limiting write-access to trusted users only.
Vendor fix
Maintain a trusted chain-of-custody on Process Optimization project files during creation, modification, distribution, backups, and use.
Mitigation
For more information, please Aveva's security bulletin AVEVA-2026-001.
Relevant CWE: CWE-676 Use of Potentially Dangerous Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.4 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:N | \n
The Process Optimization application suite leverages connection channels/protocols that by-default are not encrypted and could become subject to hijacking or data leakage in certain man-in-the-Middle or passive inspection scenarios.
\n\nMitigation
AVEVA recommends users take the following action:
Vendor fix
Update to AVEVA Process Optimization v2025
Mitigation
AVEVA alternatively recommends the following actions users can take to mitigate risk:
Vendor fix
Apply Host and/or Network firewall rules restricting the taoimr service to accept traffic only from trusted source(s). By default, AVEVA Process Optimization listens on port 8888/8889(TLS). Please refer to the AVEVA Process Optimization Installation Guide for additional details on ports configuration.
Mitigation
Apply ACLs to the installation and data folders, limiting write-access to trusted users only.
Vendor fix
Maintain a trusted chain-of-custody on Process Optimization project files during creation, modification, distribution, backups, and use.
Mitigation
For more information, please Aveva's security bulletin AVEVA-2026-001.
Relevant CWE: CWE-319 Cleartext Transmission of Sensitive Information
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.1 | \nHIGH | \nCVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this (these) vulnerability(ies), such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-15 | \n1 | \nInitial Republication of AVEVA-2026-001 | \n
Siemens ET 200SP contains a denial-of-service vulnerability that could be triggered by sending a valid S7 protocol Disconnect Request (COTP DR TPDU), causing the device to become unresponsive and require a power cycle to recover. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
\nThe following versions of Siemens SIMATIC and SIPLUS products are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.5 | \nSiemens | \nSiemens SIMATIC and SIPLUS products | \nUncontrolled Resource Consumption | \n
Affected devices do not properly handle S7 protocol session disconnect requests. When receiving a valid S7 protocol Disconnect Request (COTP DR TPDU) on TCP port 102, the devices enter an improper session state. This could allow an attacker to cause the device to become unresponsive, leading to a denial-of-service condition that requires a power cycle to restore normal operation.
\n\nMitigation
Siemens has identified the following specific workarounds and mitigations users can apply to reduce risk:
All affected products: Filter the port 102 of the devices to only accepted connections to/from the IP addresses of machines that are trusted e.g. with an external firewall.
\n
All affected products: Restrict access to the network where S7 communication messages are exchanged.
SIMATIC ET 200AL IM 157-1 PN (6ES7157-1AB00-0AB0), SIMATIC ET 200MP IM 155-5 PN HF (6ES7155-5AA00-0AC0), SIMATIC ET 200SP IM 155-6 MF HF (6ES7155-6MU00-0CN0), SIMATIC ET 200SP IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0), SIMATIC PN/MF Coupler (6ES7158-3MU10-0XA0), SIPLUS ET 200MP IM 155-5 PN HF (6AG1155-5AA00-2AC0), SIPLUS ET 200MP IM 155-5 PN HF (6AG1155-5AA00-7AC0), SIPLUS ET 200MP IM 155-5 PN HF T1 RAIL (6AG2155-5AA00-1AC0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU01-2CN0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU01-7CN0), SIPLUS ET 200SP IM 155-6 PN HF T1 RAIL (6AG2155-6AU01-1CN0), SIPLUS ET 200SP IM 155-6 PN HF TX RAIL (6AG2155-6AU01-4CN0): Currently no fix is planned
SIMATIC ET 200SP IM 155-6 PN HA (incl. SIPLUS variants): Update to V1.3
SIMATIC ET 200SP IM 155-6 PN/3 HF (6ES7155-6AU30-0CN0): Update to V4.2.2
SIMATIC PN/PN Coupler (6ES7158-3AD10-0XA0), SIPLUS NET PN/PN Coupler (6AG2158-3AD10-4XA0): Update to V6.0.0
SIMATIC ET 200SP IM 155-6 PN R1 (6ES7155-6AU00-0HM0): Update to V6.0.1
Relevant CWE: CWE-400 Uncontrolled Resource Consumption
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals. Additional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity
\nFor further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories
\nThe use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of these vulnerabilities.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Siemens ProductCERT SSA-674753 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Siemens ProductCERT directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-13 | \n1 | \nPublication Date | \n
| 2026-01-14 | \n2 | \nInitial Republication of Siemens ProductCERT SSA-674753 advisory | \n
Schneider Electric is aware of a vulnerability in its EcoStruxure Power Build Rapsody software. The [EcoStruxure Power Build Rapsody](https://www.se.com/ww/en/product-country-selector/?pageType=product-range&sourceId=2309) is used to enter or import the single line diagram, to get the extensive bill of material of your switchboard, including all devices, connection items, and mounting components. Failure to apply the mitigations/remediations provided below may risk memory corruption, heap-based buffer overflow, stack-based buffer overflow, which could result in local attackers being able to exploit these issues to potentially execute arbitrary code.
\nThe following versions of Schneider Electric EcoStruxure Power Build Rapsody are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.8 | \nSchneider Electric | \nSchneider Electric EcoStruxure Power Build Rapsody | \nDouble Free, Use After Free | \n
CWE-415: Double Free vulnerability exists that could cause heap memory corruption when the end user imports a malicious project file (SSD file) shared by the attacker into Rapsody.
\n\nVendor fix
Versions FR V2.8.1.0401, INT V2.8.6.200, ES V2.8.5.0301, BEL(NL) V2.8.3.0201, BEL(FR) V2.8.8.0201 of EcoStruxure Power Build Rapsody includes a fix for the CVE-2025-13844 vulnerability and is available for download here: https://www.se.com/ww/en/product-country-selector/?pageType=product-range&sourceId=2309 Please restart the service after installing the new version.
Mitigation
If customers choose not to apply the remediation provided above, they should immediately apply the following mitigations to reduce the risk of exploit: For CVE-2025-13844: - Only open projects from trusted sources - Ensure use of Malware scans before opening any externally created Project
Relevant CWE: CWE-415 Double Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L | \n
CWE-416: Use After Free vulnerability exists that could cause remote code execution when the end user imports the malicious project file (SSD file) into Rapsody.
\n\nVendor fix
Versions FR V2.8.1.0401, ES V2.8.5.0301, PT V2.8.7.0101, BEL(FR) V2.8.8.0201, BEL(EN) V2.8.3.0201, INT(EN) V2.8.4.0401, NL V2.8.2.000 of EcoStruxure Power Build Rapsody includes a fix for the CVE-2025-13845 vulnerability and are available for download here: https://www.se.com/ww/en/product-country-selector/?pageType=product-range&sourceId=2309 Please restart the service after installing the new version.
Mitigation
For CVE-2025-13845: - Only open projects from trusted sources - Ensure use of Malware scans before opening any externally created Project
Relevant CWE: CWE-416 Use After Free
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.8 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H | \n
We strongly recommend the following industry cybersecurity best practices. * Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network. * Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks. * Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode. * Never connect programming software to any network other than the network intended for that device. * Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks. * Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation. * Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet. * When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices. For more information refer to the Schneider Electric [Recommended Cybersecurity Best Practices](https://www.se.com/us/en/download/document/7EN52-0390/) document.
\nThis document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process. For further information related to cybersecurity in Schneider Electric's products, visit the company's cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp
\nTHIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND. SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION
\nSchneider's purpose is to create Impact by empowering all to make the most of our energy and resources, bridging progress and sustainability for all. We call this Life Is On. Our mission is to be the trusted partner in Sustainability and Efficiency. We are a global industrial technology leader bringing world-leading expertise in electrification, automation and digitization to smart industries, resilient infrastructure, future-proof data centers, intelligent buildings, and intuitive homes. Anchored by our deep domain expertise, we provide integrated end-to-end lifecycle AI enabled Industrial IoT solutions with connected products, automation, software and services, delivering digital twins to enable profitable growth for our customers. We are a people company with an ecosystem of 150,000 colleagues and more than a million partners operating in over 100 countries to ensure proximity to our customers and stakeholders. We embrace diversity and inclusion in everything we do, guided by our meaningful purpose of a sustainable future for all. www.se.com
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Schneider Electric CPCERT SEVD-2026-013-04 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Schneider Electric CPCERT directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-01-13 | \n1 | \nOriginal Release | \n
| 2026-01-14 | \n2 | \nInitial Republication of Schneider Electric CPCERT SEVD-2026-013-04 advisory | \n
CISA and the UK National Cyber Security Centre (NCSC-UK), in collaboration with federal and international partners, have released Secure Connectivity Principles for Operational Technology (OT) guidance to help asset owners address increasing business and regulatory pressures for connectivity into operational technology (OT) networks.
\nThis guidance outlines eight principles to use as a framework to design, secure, and manage connectivity into OT environments. These principles are particularly critical for operators of essential services.
\n