Successful exploitation of this vulnerability could allow an unauthorized attacker to access controller management settings, control components, disclose information, or cause a denial-of-service condition.
\nThe following versions of Honeywell IQ4x BMS Controller are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 10 | \nHoneywell | \nHoneywell IQ4x BMS Controller | \nMissing Authentication for Critical Function | \n
The Honeywell IQ4x building management controller, exposes its full web-based HMI without authentication in its factory-default configuration. With no user module configured, security is disabled by design and the system operates under a System Guest (level 100) context, granting read/write privileges to any party able to reach the HTTP interface. Authentication controls are only enforced after a web user is created via U.htm, which dynamically enables the user module. Because this function is accessible prior to authentication, a remote user can create a new account with administrative read/write permissions enabling the user module and imposing authentication under attacker-controlled credentials. This action can effectively lock legitimate operators out of local and web-based configuration and administration.
\n\nMitigation
Honeywell is aware of the issue, but has not released a fix. For more information, contact Honeywell directly. https://www.honeywell.com/us/en/contact.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n10 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-10 | \n1 | \nInitial Publication | \n
Successful exploitation of this vulnerability could result in arbitrary file upload to the target equipment.
\nThe following versions of Ceragon Siklu MultiHaul and EtherHaul Series are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 5.3 | \nCeragon | \nCeragon Siklu MultiHaul and EtherHaul Series | \nUnrestricted Upload of File with Dangerous Type | \n
The rfpiped service on TCP port 555 in Ceragon Networks / Siklu Communication EtherHaul and MultiHaul Series microwave antennas allow unauthenticated file uploads to any writable location on the device. File upload packets use weak encryption (metadata only) with file contents transmitted in cleartext. No authentication or path validation is performed.
\n\nVendor fix
Ceragon has released a software update for the affected models:
Vendor fix
Affected users should install firmware version R2.4.0 for affected MultiHaul models.
Vendor fix
Affected users should install firmware version R10.8.1 for the affected EH-8010FX model.
Vendor fix
Affected users should install firmware version R7.7.12 for other affected EtherHaul models.
Mitigation
Additionally Ceragon has provided the following security recommendations for mitigating the listed vulnerability. To prevent exposure, management access must follow standard operator security guidelines:
Mitigation
Management IP addresses must use private subnets (RFC 1918)
Mitigation
Management networks must be protected by: *-* Firewalls *-* Access Control Lists *-* Network Access Translation / Secure management domains
Mitigation
Firewalls
Mitigation
Access Control Lists
Mitigation
Network Access Translation / Secure management domains
Mitigation
Public exposure of management IP Addresses is not supported nor recommendedCeragon requests that affected users please verify that all affected radio units:
Mitigation
Use private management IP addresses only
Mitigation
Are placed behind internal security controls
Mitigation
Follow your organization's authentication and access-control policies
Mitigation
Please visit the Ceragon portal here: https://portal.ceragon.com/ (login required) for further information.
Relevant CWE: CWE-434 Unrestricted Upload of File with Dangerous Type
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this (these) vulnerability(ies), such as:
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-10 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could allow an attacker to take control of the device or view camera feeds.
\nThe following versions of Apeman Cameras are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.8 | \nApeman | \nApeman Cameras | \nInsufficiently Protected Credentials, Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting'), Missing Authentication for Critical Function | \n
A security flaw has been discovered in Apeman ID71 218.53.203.117. This vulnerability affects unknown code of the file /system/www/system.ini. The attack may be performed from remote. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
\n\nMitigation
Apeman did not respond to CISAs request for coordination. Users are encouraged to reach out to Apeman for support https://apemans.com/pages/contactus
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
A vulnerability has been found in Apeman ID71 EN75.8.53.20. The affected element is an unknown function of the file /set_alias.cgi. Such manipulation of the argument alias leads to cross site scripting. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
\n\nMitigation
Apeman did not respond to CISAs request for coordination. Users are encouraged to reach out to Apeman for support https://apemans.com/pages/contactus
Relevant CWE: CWE-79 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n3.5 | \nLOW | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:L/I:N/A:N | \n
A vulnerability was found in Apeman ID71 218.53.203.117. The impacted element is an unknown function of the file /onvif/device_service of the component ONVIF Service. Performing manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.
\n\nMitigation
Apeman did not respond to CISAs request for coordination. Users are encouraged to reach out to Apeman for support https://apemans.com/pages/contactus
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-10 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could allow an attacker to bypass authentication and execute code with root-level privileges.
\nThe following versions of Lantronix EDS3000PS and EDS5000 are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.8 | \nLantronix | \nLantronix EDS3000PS and EDS5000 | \nImproper Neutralization of Special Elements used in an OS Command ('OS Command Injection'), Authentication Bypass Using an Alternate Path or Channel, Unverified Password Change | \n
An issue was discovered in Lantronix EDS5000 2.1.0.0R3. An authenticated attacker can inject OS commands into the \"name\" parameter when deleting SSL credentials through the management interface. Injected commands are executed with root privileges.
\n\nVendor fix
For vulnerabilities CVE-2025-67034, CVE-2025-67035, CVE-2025-67036, CVE-2025-67037, CVE-2025-67038 Lantronix recommends users upgrade to EDS5000 version 2.2.0.0R1. The patch can be found here: https://ltrxdev.atlassian.net/wiki/spaces/LTRXTS/pages/2538438657/Latest+Firmware+for+the+EDS5000+series+EDS5008+EDS5016+EDS5032.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.2 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H | \n
An issue was discovered in Lantronix EDS5000 2.1.0.0R3. The SSH Client and SSH Server pages are affected by multiple OS injection vulnerabilities due to missing sanitization of input parameters. An attacker can inject arbitrary commands in delete actions of various objects, such as server keys, users, and known hosts. Commands are executed with root privileges.
\n\nVendor fix
For vulnerabilities CVE-2025-67034, CVE-2025-67035, CVE-2025-67036, CVE-2025-67037, CVE-2025-67038 Lantronix recommends users upgrade to EDS5000 version 2.2.0.0R1. The patch can be found here: https://ltrxdev.atlassian.net/wiki/spaces/LTRXTS/pages/2538438657/Latest+Firmware+for+the+EDS5000+series+EDS5008+EDS5016+EDS5032.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.2 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H | \n
An issue was discovered in Lantronix EDS5000 2.1.0.0R3. The Log Info page allows users to see log files by specifying their names. Due to a missing sanitization in the file name parameter, an authenticated attacker can inject arbitrary OS commands that are executed with root privileges.
\n\nVendor fix
For vulnerabilities CVE-2025-67034, CVE-2025-67035, CVE-2025-67036, CVE-2025-67037, CVE-2025-67038 Lantronix recommends users upgrade to EDS5000 version 2.2.0.0R1. The patch can be found here: https://ltrxdev.atlassian.net/wiki/spaces/LTRXTS/pages/2538438657/Latest+Firmware+for+the+EDS5000+series+EDS5008+EDS5016+EDS5032.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.2 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H | \n
An issue was discovered in Lantronix EDS5000 2.1.0.0R3. An authenticated attacker can inject OS commands into the \"tunnel\" parameter when killing a tunnel connection. Injected commands are executed with root privileges.
\n\nVendor fix
For vulnerabilities CVE-2025-67034, CVE-2025-67035, CVE-2025-67036, CVE-2025-67037, CVE-2025-67038 Lantronix recommends users upgrade to EDS5000 version 2.2.0.0R1. The patch can be found here: https://ltrxdev.atlassian.net/wiki/spaces/LTRXTS/pages/2538438657/Latest+Firmware+for+the+EDS5000+series+EDS5008+EDS5016+EDS5032.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.2 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H | \n
An issue was discovered in Lantronix EDS5000 2.1.0.0R3. The HTTP RPC module executes a shell command to write logs when user's authentication fails. The username is directly concatenated with the command without any sanitization. This allow attackers to inject arbitrary OS commands into the username parameter. Injected commands are executed with root privileges.
\n\nVendor fix
For vulnerabilities CVE-2025-67034, CVE-2025-67035, CVE-2025-67036, CVE-2025-67037, CVE-2025-67038 Lantronix recommends users upgrade to EDS5000 version 2.2.0.0R1. The patch can be found here: https://ltrxdev.atlassian.net/wiki/spaces/LTRXTS/pages/2538438657/Latest+Firmware+for+the+EDS5000+series+EDS5008+EDS5016+EDS5032.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
An issue was discovered in Lantronix EDS3000PS 3.1.0.0R2. The authentication on management pages can be bypassed by appending a specific suffix to the URL and by sending an Authorization header that uses \"admin\" as the username.
\n\nVendor fix
For vulnerabilities CVE-2025-67039, CVE-2025-70082, and CVE-2025-67041, Lantronix recommends users upgrade to EDS3000PS version 3.2.0.0R2. The patch can be found here: https://ltrxdev.atlassian.net/wiki/spaces/LTRXTS/pages/1349189633/Latest+Firmware+for+the+EDS3000PS+series.
Relevant CWE: CWE-288 Authentication Bypass Using an Alternate Path or Channel
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.8 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H | \n
The administrator password can be changed without knowledge of the current password. When chained with an authentication bypass vulnerability, this issue may allow unauthenticated attackers to modify the administrator password.
\n\nVendor fix
For vulnerabilities CVE-2025-67039, CVE-2025-70082, and CVE-2025-67041, Lantronix recommends users upgrade to EDS3000PS version 3.2.0.0R2. The patch can be found here: https://ltrxdev.atlassian.net/wiki/spaces/LTRXTS/pages/1349189633/Latest+Firmware+for+the+EDS3000PS+series.
Relevant CWE: CWE-620 Unverified Password Change
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n2.7 | \nLOW | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:L/A:N | \n
An issue was discovered in Lantronix EDS3000PS 3.1.0.0R2. The host parameter of the TFTP client in the Filesystem Browser page is not properly sanitized. This can be exploited to escape from the original command and execute an arbitrary one with root privileges.
\n\nVendor fix
For vulnerabilities CVE-2025-67039, CVE-2025-70082, and CVE-2025-67041, Lantronix recommends users upgrade to EDS3000PS version 3.2.0.0R2. The patch can be found here: https://ltrxdev.atlassian.net/wiki/spaces/LTRXTS/pages/1349189633/Latest+Firmware+for+the+EDS3000PS+series.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.2 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-10 | \n1 | \nInitial Publication | \n
CISA has added three new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThese types of vulnerabilities are frequent attack vectors for malicious cyber actors and pose significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Mon, 09 Mar 26 12:00:00 +0000", "last_updated": "Mon, 09 Mar 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-064-01", "title": "Delta Electronics CNCSoft-G2", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-064-01", "summary": "\nSuccessful exploitation of this vulnerability could result in an attacker achieving remote code execution on the device.
\nThe following versions of Delta Electronics CNCSoft-G2 are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.8 | \nDelta Electronics | \nDelta Electronics CNCSoft-G2 | \nOut-of-bounds Write | \n
Delta Electronics CNCSoft-G2 devices prior to version V2.1.0.39 are vulnerable to an Out-of-Bounds Write while parsing DPAX files in the DOPSoft component.
\n\nMitigation
Delta Electronics recommends users update to Version 2.1.0.39, which has resolved this vulnerability. The update can be obtained from the Delta Electronics download center at https://downloadcenter.deltaww.com/en-US/DownloadCenter?v=1&q=cncsoft&sort_expr=cdate&sort_dir=DESC.
Mitigation
For more information, see the associated Delta Electronics security advisory Delta-PCSA-2026-00004 which can be downloaded in PDF format here: https://filecenter.deltaww.com/news/download/doc/Delta-PCSA-2026-00004_CNCSoft-G2_File%20Parsing%20Out-Of-Bounds%20Write.pdf
Relevant CWE: CWE-787 Out-of-bounds Write
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.8 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nCISA recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time. This vulnerability is not exploitable remotely.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-05 | \n1 | \nInitial Republication of Delta Electronics Delta-PCSA-2026-00004 advisory | \n
CISA has added five new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThese types of vulnerabilities are frequent attack vectors for malicious cyber actors and pose significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Thu, 05 Mar 26 12:00:00 +0000", "last_updated": "Thu, 05 Mar 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-062-05", "title": "Labkotec LID-3300IP", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-062-05", "summary": "\nSuccessful exploitation of this vulnerability could allow attackers to gain unauthorized control over system operations, leading to disruption of normal functionality and potential safety hazards.
\nThe following versions of Labkotec LID-3300IP are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nLabkotec | \nLabkotec LID-3300IP | \nMissing Authentication for Critical Function | \n
The Labkotec LID-3300IP has an existing vulnerability in the ice detector software that enables an unauthenticated attacker to alter device parameters and run operational commands when specially crafted packets are sent to the device.
\n\nVendor fix
Labkotec reports that it is not possible to implement secure and encrypted network traffic on the LID-3300IP. For this reason, Labkotec recommends updating ice detectors to the LID-3300IP Type 2 model and installing the latest firmware version V2.40. It is also highly recommended to activate HTTPS for network traffic. The device type and software version can be verified in the web interface.
Mitigation
Devices not connected to an Ethernet network are not susceptible to this attack. Ice detectors operating on secure internal networks that adhere to modern security standards, where only authorized devices and users have access, are protected against external threats.
Mitigation
Labkotec recommends implementing the following additional security controls:
Do not connect the device to the public Internet
Follow good security practices
Change Default Credentials
Enable Secure Management Access
Network Segmentation
Implement Firewall and Access Controls
Restrict Protocols
Monitor and Alert
Avoid Direct Internet Exposure
Keep Firmware Updated
Control Physical Access
Maintain Inventory and Access Reviews
Mitigation
Users can find more information in Labkotec's security advisory (https://labkotec.fi/wp-content/uploads/CA-000001-Cybersecurity-Advisory.pdf).
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-03 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could enable attackers to gain unauthorized administrative control over vulnerable charging stations or disrupt charging services through denial-of-service attacks.
\nThe following versions of Mobiliti e-mobi.hu are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nMobiliti | \nMobiliti e-mobi.hu | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nMitigation
Mobiliti did not respond to CISA's request for coordination. Contact Mobiliti using their contact page here: https://www.mobiliti.hu/emobilitas/ugyfeltamogatas/ugyfelszolgalat for more information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nMitigation
Mobiliti did not respond to CISA's request for coordination. Contact Mobiliti using their contact page here: https://www.mobiliti.hu/emobilitas/ugyfeltamogatas/ugyfelszolgalat for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nMitigation
Mobiliti did not respond to CISA's request for coordination. Contact Mobiliti using their contact page here: https://www.mobiliti.hu/emobilitas/ugyfeltamogatas/ugyfelszolgalat for more information.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nMitigation
Mobiliti did not respond to CISA's request for coordination. Contact Mobiliti using their contact page here: https://www.mobiliti.hu/emobilitas/ugyfeltamogatas/ugyfelszolgalat for more information.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-03 | \n1 | \nInitial Publication | \n
CISA has added two new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThese types of vulnerabilities are frequent attack vectors for malicious cyber actors and pose significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Tue, 03 Mar 26 12:00:00 +0000", "last_updated": "Tue, 03 Mar 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-062-03", "title": "Hitachi Energy RTU500 Product", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-062-03", "summary": "\nHitachi Energy is aware of vulnerabilities that affect RTU500 product versions listed in this document. Successful exploitation of these vulnerabilities can result in the exposure of low-value user management information and device outage. Please refer to the Recommended Immediate Actions for information about the mitigation/remediation.
\nThe following versions of Hitachi Energy RTU500 Product are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.5 | \nHitachi Energy | \nHitachi Energy RTU500 Product | \nImproper Handling of Insufficient Permissions or Privileges , Incomplete List of Disallowed Inputs, Uncontrolled Recursion, Allocation of Resources Without Limits or Throttling | \n
RTU500 web interface: An unprivileged user can read user management information. The information cannot be accessed via the RTU500 web user interface but requires further tools like browser development utilities to access them without required privileges.
\n\nVendor fix
Update to CMU Firmware version 12.7.8
Mitigation
Follow general mitigation factors/workarounds
Vendor fix
Update to CMU Firmware version 13.7.8 or latest
Vendor fix
Update to CMU Firmware version 13.8.2
Relevant CWE: CWE-280 Improper Handling of Insufficient Permissions or Privileges
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.3 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N | \n
IEC 60870-5-104: Potential Denial of Service impact on reception of invalid U-format frame. Product is only affected if IEC 60870-5-104 bi-directional functionality is configured. Enabling secure communication following IEC 62351-3 does not remediate the vulnerability but mitigates the risk of exploitation.
\n\nVendor fix
Update to CMU Firmware version 12.7.8
Mitigation
Follow general mitigation factors/workarounds
Vendor fix
Update to CMU Firmware version 13.7.8 or latest
Vendor fix
Update to CMU Firmware version 13.8.2
Relevant CWE: CWE-184 Incomplete List of Disallowed Inputs
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
A stack overflow vulnerability exists in the libexpat library due to the way it handles recursive entity expansion in XML documents. When parsing an XML document with deeply nested entity references, libexpat can be forced to recurse indefinitely, exhausting the stack space and causing a crash. This issue could lead to denial of service (DoS) or, in some cases, exploitable memory corruption, depending on the environment and library usage. Product is only affected if IEC61850 functionality is configured.
\n\nVendor fix
Update to CMU Firmware version 12.7.8
Mitigation
Follow general mitigation factors/workarounds
Vendor fix
Update to CMU Firmware version 13.7.8 or latest
Vendor fix
Update to CMU Firmware version 13.8.2
Relevant CWE: CWE-674 Uncontrolled Recursion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
libexpat in Expat before 2.7.2 allows attackers to trigger large dynamic memory allocations via a small document that is submitted for parsing. Product is only affected if IEC61850 functionality is configured.
\n\nVendor fix
Update to CMU Firmware version 12.7.8
Mitigation
Follow general mitigation factors/workarounds
Vendor fix
Update to CMU Firmware version 13.7.8 or latest
Vendor fix
Update to CMU Firmware version 13.8.2
Relevant CWE: CWE-770 Allocation of Resources Without Limits or Throttling
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The information in this document is subject to change without notice and should not be construed as a commitment by Hitachi Energy. Hitachi Energy provides no warranty, express or implied, including warranties of merchantability and fitness for a particular purpose, for the information contained in this document, and assumes no responsibility for any errors that may appear in this document. In no event shall Hitachi Energy or any of its suppliers be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising from the use of this document, or from the use of any hardware or software described in this document, even if Hitachi Energy or its suppliers have been advised of the possibility of such damages. This document and parts hereof must not be reproduced or copied without written permission from Hitachi Energy and the contents hereof must not be imparted to a third party nor used for any unauthorized purpose. All rights to registrations and trademarks reside with their respective owners.
\nFor additional information and support please contact your product provider or Hitachi Energy service organization. For contact information, see https://www.hitachienergy.com/contact-us/ for Hitachi Energy contact-centers.
\nRecommended security practices and firewall configurations can help protect a process control network from attacks that originate from outside the network. Such practices include that process control systems are physically protected from direct access by unauthorized personnel, have no direct connections to the Internet, and are separated from other networks by means of a firewall system that has a minimal number of ports exposed, and others that have to be evaluated case by case. Process control systems should not be used for Internet surfing, instant messaging, or receiving e-mails. Portable computers and removable storage media should be carefully scanned for viruses before they are connected to a control system. Proper password policies and processes should be followed.
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Hitachi Energy PSIRT 8DBD000237 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Hitachi Energy PSIRT directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-24 | \n1 | \nInitial public release | \n
| 2026-03-03 | \n2 | \nInitial CISA Republication of Hitachi Energy PSIRT 8DBD000237 advisory | \n
Successful exploitation of these vulnerabilities could enable attackers to gain unauthorized administrative control over vulnerable charging stations or disrupt charging services through denial-of-service attacks.
\nThe following versions of Everon OCPP Backends are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nEveron | \nEveron OCPP Backends | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nMitigation
Everon has shut down their platform on December 1st, 2025.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nMitigation
Everon has shut down their platform on December 1st, 2025.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nMitigation
Everon has shut down their platform on December 1st, 2025.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nMitigation
Everon has shut down their platform on December 1st, 2025.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-03 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could enable attackers to gain unauthorized administrative control over vulnerable charging stations or disrupt charging services through denial-of-service attacks.
\nThe following versions of ePower epower.ie are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nePower | \nePower epower.ie | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nVendor fix
ePower did not respond to CISA's request for coordination. Contact ePower using their contact page here: https://www.epower.ie/support/ for more information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nVendor fix
ePower did not respond to CISA's request for coordination. Contact ePower using their contact page here: https://www.epower.ie/support/ for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nVendor fix
ePower did not respond to CISA's request for coordination. Contact ePower using their contact page here: https://www.epower.ie/support/ for more information.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nVendor fix
ePower did not respond to CISA's request for coordination. Contact ePower using their contact page here: https://www.epower.ie/support/ for more information.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-03 | \n1 | \nInitial Publication | \n
Successful exploitation of this vulnerability could allow a local attacker to escalate privileges or cause a denial-of-service condition.
\nThe following versions of Portwell Engineering Toolkits are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 8.8 | \nPortwell | \nPortwell Engineering Toolkits | \nImproper Restriction of Operations within the Bounds of a Memory Buffer | \n
An Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in Portwell Engineering Toolkits version 4.8.2 could allow a local authenticated attacker to read and write to arbitrary memory via the Portwell Engineering Toolkits driver. Successful exploitation of this vulnerability could result in escalation of privileges or cause a denial-of-service condition.
\n\nVendor fix
Portwell has not responded to requests to work with CISA to mitigate this vulnerability. Users of affected versions of Portwell Engineering Toolkits are invited to contact Portwell customer support (https://portwell.com/support.php) for additional information.
Relevant CWE: CWE-119 Improper Restriction of Operations within the Bounds of a Memory Buffer
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.8 | \nHIGH | \nCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time. This vulnerability is not exploitable remotely.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-03 | \n1 | \nInitial Publication | \n
Hitachi Energy is aware of vulnerabilities that affect the Relion REB500 product versions listed in this document. Authenticated users with certain roles can exploit the vulnerabilities to access and modify the directory contents they are not authorized to do so. Please refer to the Recommended Immediate Actions for information about the mitigation/remediation.
\nThe following versions of Hitachi Energy Relion REB500 Product are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 6.8 | \nHitachi Energy | \nHitachi Energy Relion REB500 Product | \nPrivilege Defined With Unsafe Actions | \n
A vulnerability exists in REB500 for an authenticated user with Installer role to access and alter the contents of directories that the role is not authorized to do so.
\n\nVendor fix
Hitachi Energy recommends that users update to version 8.3.3.1.
Mitigation
For CVE-2026-2459, as a mitigation strategy, users may also disable the Installer role and enable it only during the firmware update process.
Relevant CWE: CWE-267 Privilege Defined With Unsafe Actions
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N | \n
A vulnerability exists in REB500 for an authenticated user with low-level privileges to access and alter the content of directories by using the DAC protocol that the user is not authorized to do so.
\n\nVendor fix
Update to version 8.3.3.1
Mitigation
Apply general mitigation factors
Relevant CWE: CWE-267 Privilege Defined With Unsafe Actions
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.8 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N | \n
The information in this document is subject to change without notice and should not be construed as a commitment by Hitachi Energy. Hitachi Energy provides no warranty, express or implied, including warranties of merchantability and fitness for a particular purpose, for the information contained in this document, and assumes no responsibility for any errors that may appear in this document. In no event shall Hitachi Energy or any of its suppliers be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising from the use of this document, or from the use of any hardware or software described in this document, even if Hitachi Energy or its suppliers have been advised of the possibility of such damages. This document and parts hereof must not be reproduced or copied without written permission from Hitachi Energy and the contents hereof must not be imparted to a third party nor used for any unauthorized purpose. All rights to registrations and trademarks reside with their respective owners.
\nFor additional information and support please contact your product provider or Hitachi Energy service organization. For contact information, see https://www.hitachienergy.com/contact-us/ for Hitachi Energy contact-centers.
\nRecommended security practices and firewall configurations can help protect a process control network from attacks that originate from outside the network. Such practices include that process control systems are physically protected from direct access by unauthorized personnel, have no direct connections to the Internet, and are separated from other networks by means of a firewall system that has a minimal number of ports exposed, and others that have to be evaluated case by case. Process control systems should not be used for Internet surfing, instant messaging, or receiving e-mails. Portable computers and removable storage media should be carefully scanned for viruses before they are connected to a control system. Proper password policies and processes should be followed.
\nThis product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.
\nMinimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolate them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a verbatim republication of Hitachi Energy PSIRT 8DBD000217 from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Hitachi Energy PSIRT directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-24 | \n1 | \nInitial public release | \n
| 2026-03-03 | \n2 | \nInitial CISA Republication of Hitachi Energy PSIRT 8DBD000217 advisory | \n
Successful exploitation of these vulnerabilities could allow a remote attacker to cause a denial-of-service condition by continuously sending UDP packets to the affected products.
\nThe following versions of Mitsubishi Electric MELSEC iQ-F Series EtherNet/IP module and Ethernet module are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.5 | \nMitsubishi Electric | \nMitsubishi Electric MELSEC iQ-F Series EtherNet/IP module and Ethernet module | \nAlways-Incorrect Control Flow Implementation, Improper Resource Shutdown or Release | \n
An always-incorrect control flow implementation vulnerability may allow a remote attacker to cause a denial-of-service condition by continuously sending UDP packets to the affected products.
\n\nVendor fix
Users of FX5-ENET/IP versions 1.106 and prior should download the update file for version 1.107 or later and apply it. The update file is available at: https://www.mitsubishielectric.com/fa/download/index.html.
Mitigation
The fixed version for the FX5-EIP is scheduled to be released in the near future. In the meantime, users should apply mitigations or workarounds.
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends using a firewall, virtual private network (VPN), etc. and preventing unauthorized access when internet access is required, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends using the affected product within a LAN and blocking access from untrusted networks and hosts through firewalls, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends using the IP filter function of the affected product and blocking access from untrusted hosts, to minimize the risk of exploiting this vulnerability. For details on the IP filter function, refer to \u201c13.1 IP Filter Function\u201d in the MELSEC iQ-F FX5 User\u2019s Manual (Communication).
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends restricting physical access to the affected product, as well as to PCs and network devices to which it is connected, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends installing anti-virus software on PCs that can access the affected product, to minimize the risk of exploiting this vulnerability.
Mitigation
For more information, see Mitsubishi Electric 2025-021. https://www.mitsubishielectric.com/psirt/vulnerability/pdf/2025-021_en.pdf
Relevant CWE: CWE-670 Always-Incorrect Control Flow Implementation
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An improper resource shutdown or release vulnerability in the affected products may allow a remote attacker to cause a denial-of-service condition by continuously sending UDP packets.
\n\nMitigation
The fixed version for the FX5-EIP is scheduled to be released in the near future. In the meantime, users should apply mitigations or workarounds.
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends using a firewall, virtual private network (VPN), etc. and preventing unauthorized access when internet access is required, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends using the affected product within a LAN and blocking access from untrusted networks and hosts through firewalls, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends using the IP filter function of the affected product and blocking access from untrusted hosts, to minimize the risk of exploiting this vulnerability. For details on the IP filter function, refer to \u201c13.1 IP Filter Function\u201d in the MELSEC iQ-F FX5 User\u2019s Manual (Communication).
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends restricting physical access to the affected product, as well as to PCs and network devices to which it is connected, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends installing anti-virus software on PCs that can access the affected product, to minimize the risk of exploiting this vulnerability.
Mitigation
For more information, see Mitsubishi Electric 2025-021. https://www.mitsubishielectric.com/psirt/vulnerability/pdf/2025-021_en.pdf
Relevant CWE: CWE-404 Improper Resource Shutdown or Release
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
An improper resource shutdown or release vulnerability may allow a remote attacker to cause a denial-of-service condition in the affected products by continuously sending UDP packets.
\n\nNo fix planned
Users should apply mitigations or workarounds since there are no plans to release a fixed version.
Mitigation
For users of products that do not have a fixed version, Mitsubishi Electric recommends using a firewall, virtual private network (VPN), etc. and preventing unauthorized access when internet access is required, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version, Mitsubishi Electric recommends using the affected product within a LAN and blocking access from untrusted networks and hosts through firewalls, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version, Mitsubishi Electric recommends using the IP filter function of the affected product and blocking access from untrusted hosts, to minimize the risk of exploiting this vulnerability. For details on the IP filter function, refer to \u201c13.1 IP Filter Function\u201d in the MELSEC iQ-F FX5 User\u2019s Manual (Communication).
Mitigation
For users of products that do not have a fixed version, Mitsubishi Electric recommends restricting physical access to the affected product, as well as to PCs and network devices to which it is connected, to minimize the risk of exploiting this vulnerability.
Mitigation
For users of products that do not have a fixed version, Mitsubishi Electric recommends installing anti-virus software on PCs that can access the affected product, to minimize the risk of exploiting this vulnerability.
Mitigation
For more information, see Mitsubishi Electric 2025-021. https://www.mitsubishielectric.com/psirt/vulnerability/pdf/2025-021_en.pdf
Relevant CWE: CWE-404 Improper Resource Shutdown or Release
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
This product is provided subject to this notification (https://www.cisa.gov/notification) and this privacy & use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities. CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nThis ICSA is a republication of Mitsubishi Electric security advisory \"2025-021 Multiple denial-of-service vulnerabilities in Ethernet function of MELSEC iQ-F Series EtherNet/IP module and Ethernet module\" from a direct conversion of the vendor's Common Security Advisory Framework (CSAF) advisory. This is republished to CISA's website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact CISA directly for any questions regarding this advisory.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-03-03 | \n1 | \nInitial Publication | \n
| 2026-03-03 | \n2 | \nInitial CISA Republication of Mitsubishi Electric security advisory 2025-021 | \n
Successful exploitation of this vulnerability could allow attackers to gain unauthorized access to sensitive device data, bypass surveillance controls, and expose facilities to privacy breaches, operational risks, and regulatory compliance issues.
\nThe following versions of Pelco, Inc. Sarix Pro 3 Series IP Cameras are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 7.5 | \nPelco, Inc. | \nPelco, Inc. Sarix Pro 3 Series IP Cameras | \nAuthentication Bypass Using an Alternate Path or Channel | \n
The Pelco, Inc. Sarix Professional 3 Series Cameras are vulnerable to an authentication bypass issue in their web management interface. The flaw stems from inadequate enforcement of access controls, allowing certain functionality to be accessed without proper authentication. This weakness can lead to unauthorized viewing of live video streams, creating privacy concerns and operational risks for organizations relying on these cameras. Additionally, it may expose operators to regulatory and compliance challenges.
\n\nMitigation
Pelco, Inc. recommends that all Sarix Professional 3 Series Camera users update their camera firmware to version 02.53 or later. Installing the latest firmware ensures your device receives the most up-to-date bug fixes and critical security enhancements.
Mitigation
More information can be found by visiting Pelco, Inc's technical support page (https://www.pelco.com/support) for assistance.
Relevant CWE: CWE-288 Authentication Bypass Using an Alternate Path or Channel
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could allow an attacker to terminate the software stack process, cause a denial-of-service condition, or execute arbitrary code.
\nThe following versions of Yokogawa CENTUM VP R6, R7 are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 6.9 | \nYokogawa | \nYokogawa CENTUM VP R6, R7 | \nOut-of-bounds Write, Reachable Assertion, Integer Underflow (Wrap or Wraparound), Improper Handling of Length Parameter Inconsistency | \n
If the affected product receives maliciously crafted packets, a DoS attack may cause Vnet/IP communication functions to stop or arbitrary programs to be executed.
\n\nMitigation
Yokogawa recommends users apply patch software (R1.08.00).
Mitigation
Yokogawa recommends users contact a local supporting office for further information or support. https://contact.yokogawa.com/cs/gw?c-id=000498
Mitigation
For more information and details on implementing these mitigations, users should see the Yokogawa advisory YSAR-26-0002 at https://web-material3.yokogawa.com/1/39281/files/YSAR-26-0002-E.pdf
Relevant CWE: CWE-787 Out-of-bounds Write
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.9 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:L/A:H | \n
If the affected product receives maliciously crafted packets, Vnet/IP software stack process may be terminated.
\n\nMitigation
Yokogawa recommends users apply patch software (R1.08.00).
Mitigation
Yokogawa recommends users contact a local supporting office for further information or support. https://contact.yokogawa.com/cs/gw?c-id=000498
Mitigation
For more information and details on implementing these mitigations, users should see the Yokogawa advisory YSAR-26-0002 at https://web-material3.yokogawa.com/1/39281/files/YSAR-26-0002-E.pdf
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
If the affected product receives maliciously crafted packets, Vnet/IP software stack process may be terminated.
\n\nMitigation
Yokogawa recommends users apply patch software (R1.08.00).
Mitigation
Yokogawa recommends users contact a local supporting office for further information or support. https://contact.yokogawa.com/cs/gw?c-id=000498
Mitigation
For more information and details on implementing these mitigations, users should see the Yokogawa advisory YSAR-26-0002 at https://web-material3.yokogawa.com/1/39281/files/YSAR-26-0002-E.pdf
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
If theaffected product receives maliciously crafted packets, Vnet/IP software stack process may be terminated.
\n\nMitigation
Yokogawa recommends users apply patch software (R1.08.00).
Mitigation
Yokogawa recommends users contact a local supporting office for further information or support. https://contact.yokogawa.com/cs/gw?c-id=000498
Mitigation
For more information and details on implementing these mitigations, users should see the Yokogawa advisory YSAR-26-0002 at https://web-material3.yokogawa.com/1/39281/files/YSAR-26-0002-E.pdf
Relevant CWE: CWE-191 Integer Underflow (Wrap or Wraparound)
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
If the affected product receives maliciously crafted packets, Vnet/IP software stack process may be terminated.
\n\nMitigation
Yokogawa recommends users apply patch software (R1.08.00).
Mitigation
Yokogawa recommends users contact a local supporting office for further information or support. https://contact.yokogawa.com/cs/gw?c-id=000498
Mitigation
For more information and details on implementing these mitigations, users should see the Yokogawa advisory YSAR-26-0002 at https://web-material3.yokogawa.com/1/39281/files/YSAR-26-0002-E.pdf
Relevant CWE: CWE-130 Improper Handling of Length Parameter Inconsistency
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
If the affected product receives maliciously crafted packets, Vnet/IP software stack process may be terminated.
\n\nMitigation
Yokogawa recommends users apply patch software (R1.08.00).
Mitigation
Yokogawa recommends users contact a local supporting office for further information or support. https://contact.yokogawa.com/cs/gw?c-id=000498
Mitigation
For more information and details on implementing these mitigations, users should see the Yokogawa advisory YSAR-26-0002 at https://web-material3.yokogawa.com/1/39281/files/YSAR-26-0002-E.pdf
Relevant CWE: CWE-617 Reachable Assertion
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n5.3 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time. These vulnerabilities are not exploitable remotely. These vulnerabilities have a high attack complexity.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Republication of YSAR-26-0002 | \n
Successful exploitation of these vulnerabilities could allow an attacker to bypass authentication, cause a denial-of-service condition, cause memory corruption, and execute arbitrary code.
\nThe following versions of Copeland XWEB and XWEB Pro are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 10 | \nCopeland | \nCopeland XWEB and XWEB Pro | \nUnexpected Status Code or Return Value, Use of a Broken or Risky Cryptographic Algorithm, Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection'), Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal'), Stack-based Buffer Overflow | \n
A vulnerability exists in Copeland XWEB Pro version 1.12.1 and prior, in which an unexpected return value from the authentication routine is later on processed as a legitimate value, resulting in an authentication bypass.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-394 Unexpected Status Code or Return Value
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.6 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:L | \n
An authentication bypass vulnerability exists in Copeland XWEB Pro version 1.12.1 and prior, enabling any attackers to bypass the authentication requirement and achieve pre-authenticated code execution on the system.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-327 Use of a Broken or Risky Cryptographic Algorithm
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n10 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an unauthenticated attacker to achieve remote code execution on the system by sending a crafted request to the libraries installation route and injecting malicious input into the request body.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the request body sent to the contacts import route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into requests sent to the restore route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into requests sent to the templates route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into requests sent to the firmware update route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by supplying a crafted firmware update file via the firmware update route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the devices field of the firmware update update action to achieve remote code execution.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the devices field of the firmware update apply action.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the devices field when accessing the get setup route, leading to remote code execution.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the map filename field during the map upload action of the parameters route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into OpenSSL argument fields within requests sent to the utility route, leading to remote code execution.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into parameters of the Modbus command tool in the debug route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by supplying a crafted template file to the devices route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by sending malicious input injected into the server username field of the import preconfiguration action in the API V1 route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the server username and/or password fields of the restore action in the API V1 route.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by providing malicious input via the device hostname configuration which is later processed during system setup, resulting in remote code execution.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the Wi-Fi SSID and/or password fields can lead to remote code execution when the configuration is processed.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by configuring a maliciously crafted LCD state which is later processed during system setup, enabling remote code execution.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
An arbitrary file-read vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling unauthenticated attackers to read arbitrary files on the system, and potentially causing a denial-of-service attack.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-22 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n3.7 | \nLOW | \nCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N | \n
A stack based buffer overflow exists in an API route of XWEB Pro version 1.12.1 and prior, enabling unauthenticated attackers to cause stack corruption and a termination of the program.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-121 Stack-based Buffer Overflow
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n4.3 | \nMEDIUM | \nCVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L | \n
An OS Command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by modifying malicious input injected into the MBird SMS service URL and/or code via the utility route which is later processed during system setup, leading to remote code execution.
\n\nMitigation
Copeland has provided a fix for the vulnerabilities and recommends users update the XWEB Pro to the latest version by going to their software update page https://webapps.copeland.com/Dixell/Pages/SystemSoftwareUpdate in the sections dedicated to the different XWEBPRO models page.
Mitigation
Alternatively, a user logged into an XWEB Pro with internet access can update XWEB Pro directly from Copeland servers via the menu SYSTEM -- Updates | Network.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8 | \nHIGH | \nCVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nCISA also recommends users take the following measures to protect themselves from social engineering attacks:
\nDo not click web links or open attachments in unsolicited email messages.
\nRefer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
\nRefer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could enable attackers to gain unauthorized administrative control over vulnerable charging stations or disrupt charging services through denial-of-service attacks.
\nThe following versions of EV Energy ev.energy are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nEV Energy | \nEV Energy ev.energy | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nVendor fix
EV Energy did not respond to CISA's request for coordination. Contact EV Energy using their contact page here: https://www.ev.energy/en-us for more information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nVendor fix
EV Energy did not respond to CISA's request for coordination. Contact EV Energy using their contact page here: https://www.ev.energy/en-us for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nVendor fix
EV Energy did not respond to CISA's request for coordination. Contact EV Energy using their contact page here: https://www.ev.energy/en-us for more information.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nVendor fix
EV Energy did not respond to CISA's request for coordination. Contact EV Energy using their contact page here: https://www.ev.energy/en-us for more information.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could enable attackers to gain unauthorized administrative control over vulnerable charging stations or disrupt charging services through denial-of-service attacks.
\nThe following versions of Mobility46 mobility46.se are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nMobility46 | \nMobility46 mobility46.se | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nVendor fix
Mobility46 did not respond to CISA's request for coordination. Contact Mobility46 using their contact page here: https://www.mobility46.se/en/contact-us for more information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nVendor fix
Mobility46 did not respond to CISA's request for coordination. Contact Mobility46 using their contact page here: https://www.mobility46.se/en/contact-us for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nVendor fix
Mobility46 did not respond to CISA's request for coordination. Contact Mobility46 using their contact page here: https://www.mobility46.se/en/contact-us for more information.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nVendor fix
Mobility46 did not respond to CISA's request for coordination. Contact Mobility46 using their contact page here: https://www.mobility46.se/en/contact-us for more information.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could allow attackers to impersonate charging stations, hijack sessions, suppress or misroute legitimate traffic to cause large-scale denial of service, and manipulate data sent to the backend.
\nThe following versions of CloudCharge cloudcharge.se are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nCloudCharge | \nCloudCharge cloudcharge.se | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nMitigation
CloudCharge did not respond to CISA's request for coordination. Contact CloudCharge using their contact page here: https://cloudcharge.tech/support/contact/ for more information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nMitigation
CloudCharge did not respond to CISA's request for coordination. Contact CloudCharge using their contact page here: https://cloudcharge.tech/support/contact/ for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nMitigation
CloudCharge did not respond to CISA's request for coordination. Contact CloudCharge using their contact page here: https://cloudcharge.tech/support/contact/ for more information.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nMitigation
CloudCharge did not respond to CISA's request for coordination. Contact CloudCharge using their contact page here: https://cloudcharge.tech/support/contact/ for more information.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could allow attackers to impersonate charging stations, hijack sessions, suppress or misroute legitimate traffic to cause large-scale denial of service, and manipulate data sent to the backend.
\nThe following versions of EV2GO ev2go.io are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nEV2GO | \nEV2GO ev2go.io | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nVendor fix
EV2GO did not respond to CISA's request for coordination. Contact EV2GO using their contact page here: https://ev2go.io/ for more information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nVendor fix
EV2GO did not respond to CISA's request for coordination. Contact EV2GO using their contact page here: https://ev2go.io/ for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nVendor fix
EV2GO did not respond to CISA's request for coordination. Contact EV2GO using their contact page here: https://ev2go.io/ for more information.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nVendor fix
EV2GO did not respond to CISA's request for coordination. Contact EV2GO using their contact page here: https://ev2go.io/ for more information.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could allow attackers to impersonate charging stations, hijack sessions, suppress or misroute legitimate traffic to cause large-scale denial of service, and manipulate data sent to the backend.
\nThe following versions of SWITCH EV swtchenergy.com are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nSWITCH EV | \nSWITCH EV swtchenergy.com | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nVendor fix
SWITCH EV did not respond to CISA's request for coordination. Contact SWITCH EV using their contact page here: https://swtchenergy.com/contact/ for more information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nVendor fix
SWITCH EV did not respond to CISA's request for coordination. Contact SWITCH EV using their contact page here: https://swtchenergy.com/contact/ for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nVendor fix
SWITCH EV did not respond to CISA's request for coordination. Contact SWITCH EV using their contact page here: https://swtchenergy.com/contact/ for more information.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nVendor fix
SWITCH EV did not respond to CISA's request for coordination. Contact SWITCH EV using their contact page here: https://swtchenergy.com/contact/ for more information.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities could enable attackers to gain unauthorized administrative control over vulnerable charging stations or disrupt charging services through denial-of-service attacks.
\nThe following versions of Chargemap chargemap.com are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.4 | \nChargemap | \nChargemap chargemap.com | \nMissing Authentication for Critical Function, Improper Restriction of Excessive Authentication Attempts, Insufficient Session Expiration, Insufficiently Protected Credentials | \n
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
\n\nVendor fix
Chargemap did not respond to CISA's request for coordination. Contact Chargemap using their contact page here: https://chargemap.com/en-us/support for more information.
Relevant CWE: CWE-306 Missing Authentication for Critical Function
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.4 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:L | \n
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or misrouting legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
\n\nVendor fix
Chargemap did not respond to CISA's request for coordination. Contact Chargemap using their contact page here: https://chargemap.com/en-us/support for more information.
Relevant CWE: CWE-307 Improper Restriction of Excessive Authentication Attempts
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | \n
The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.
\n\nVendor fix
Chargemap did not respond to CISA's request for coordination. Contact Chargemap using their contact page here: https://chargemap.com/en-us/support for more information.
Relevant CWE: CWE-613 Insufficient Session Expiration
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L | \n
Charging station authentication identifiers are publicly accessible via web-based mapping platforms.
\n\nVendor fix
Chargemap did not respond to CISA's request for coordination. Contact Chargemap using their contact page here: https://chargemap.com/en-us/support for more information.
Relevant CWE: CWE-522 Insufficiently Protected Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.5 | \nMEDIUM | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
Successful exploitation of these vulnerabilities can lead to pre-authentication remote code execution, information leak or denial of service.
\nThe following versions of Johnson Controls, Inc. Frick Controls Quantum HD are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.1 | \nJohnson Controls, Inc. | \nJohnson Controls, Inc. Frick Controls Quantum HD | \nImproper Neutralization of Special Elements used in an OS Command ('OS Command Injection'), Improper Control of Generation of Code ('Code Injection'), Relative Path Traversal, Plaintext Storage of a Password | \n
The Frick Controls Quantum HD is vulnerable due to insufficient validation of input in certain parameters that may permit unexpected actions, which could impact the security of the device before authentication occurs.
\n\nVendor fix
The Frick Controls Quantum HD, versions 10.22 through 11, are legacy platforms that have reached end of support. Johnson Controls, Inc. recommends upgrading to the latest platform, Quantum HD Unity, version 12 or higher. The update procedure can be found here (https://frickcontrolsblob.file.core.windows.net/frickweb1/Quantum-HD-Unity/Quantum_HD_Unity_Software_Update_Procedure.pdf?sv=2018-03-28&si=frickweb1-174C1294FA7&sr=f&sig=us0dhk6IWmCvmDvBs02yJvC%2BjnzbxqZmb4QEpVVDkxY%3D).
Mitigation
After completing the upgrade to version 12, verify full compliance with the hardening guide and apply all recommended security configurations.
Mitigation
For more detailed mitigation instructions, please see Johnson Controls Product Security Advisory JCI-PSA-2026-05 at https://www.johnsoncontrols.com/trust-center/cybersecurity/security-advisories.
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H | \n
The Frick Controls Quantum HD is vulnerable due to insufficient validation of input in certain parameters that may permit unexpected actions, which could impact the security of the device before authentication occurs.
\n\nVendor fix
The Frick Controls Quantum HD, versions 10.22 through 11, are legacy platforms that have reached end of support. Johnson Controls, Inc. recommends upgrading to the latest platform, Quantum HD Unity, version 12 or higher. The update procedure can be found here (https://frickcontrolsblob.file.core.windows.net/frickweb1/Quantum-HD-Unity/Quantum_HD_Unity_Software_Update_Procedure.pdf?sv=2018-03-28&si=frickweb1-174C1294FA7&sr=f&sig=us0dhk6IWmCvmDvBs02yJvC%2BjnzbxqZmb4QEpVVDkxY%3D).
Mitigation
After completing the upgrade to version 12, verify full compliance with the hardening guide and apply all recommended security configurations.
Mitigation
For more detailed mitigation instructions, please see Johnson Controls Product Security Advisory JCI-PSA-2026-05 at https://www.johnsoncontrols.com/trust-center/cybersecurity/security-advisories.
Relevant CWE: CWE-94 Improper Control of Generation of Code ('Code Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H | \n
The Frick Controls Quantum HD is vulnerable due to insufficient validation of input in certain parameters that may permit unexpected actions, which could impact the security of the device before authentication occurs.
\n\nVendor fix
The Frick Controls Quantum HD, versions 10.22 through 11, are legacy platforms that have reached end of support. Johnson Controls, Inc. recommends upgrading to the latest platform, Quantum HD Unity, version 12 or higher. The update procedure can be found here (https://frickcontrolsblob.file.core.windows.net/frickweb1/Quantum-HD-Unity/Quantum_HD_Unity_Software_Update_Procedure.pdf?sv=2018-03-28&si=frickweb1-174C1294FA7&sr=f&sig=us0dhk6IWmCvmDvBs02yJvC%2BjnzbxqZmb4QEpVVDkxY%3D).
Mitigation
After completing the upgrade to version 12, verify full compliance with the hardening guide and apply all recommended security configurations.
Mitigation
For more detailed mitigation instructions, please see Johnson Controls Product Security Advisory JCI-PSA-2026-05 at https://www.johnsoncontrols.com/trust-center/cybersecurity/security-advisories.
Relevant CWE: CWE-94 Improper Control of Generation of Code ('Code Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H | \n
The Frick Controls Quantum HD is vulnerable due to insufficient validation of input in certain parameters that may permit unexpected actions, which could impact the security of the device before authentication occurs.
\n\nVendor fix
The Frick Controls Quantum HD, versions 10.22 through 11, are legacy platforms that have reached end of support. Johnson Controls, Inc. recommends upgrading to the latest platform, Quantum HD Unity, version 12 or higher. The update procedure can be found here (https://frickcontrolsblob.file.core.windows.net/frickweb1/Quantum-HD-Unity/Quantum_HD_Unity_Software_Update_Procedure.pdf?sv=2018-03-28&si=frickweb1-174C1294FA7&sr=f&sig=us0dhk6IWmCvmDvBs02yJvC%2BjnzbxqZmb4QEpVVDkxY%3D).
Mitigation
After completing the upgrade to version 12, verify full compliance with the hardening guide and apply all recommended security configurations.
Mitigation
For more detailed mitigation instructions, please see Johnson Controls Product Security Advisory JCI-PSA-2026-05 at https://www.johnsoncontrols.com/trust-center/cybersecurity/security-advisories.
Relevant CWE: CWE-94 Improper Control of Generation of Code ('Code Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H | \n
The Frick Controls Quantum HD contains a vulnerability that allows an unauthenticated attacker to execute arbitrary code on the affected device, leading to full system compromise.
\n\nVendor fix
The Frick Controls Quantum HD, versions 10.22 through 11, are legacy platforms that have reached end of support. Johnson Controls, Inc. recommends upgrading to the latest platform, Quantum HD Unity, version 12 or higher. The update procedure can be found here (https://frickcontrolsblob.file.core.windows.net/frickweb1/Quantum-HD-Unity/Quantum_HD_Unity_Software_Update_Procedure.pdf?sv=2018-03-28&si=frickweb1-174C1294FA7&sr=f&sig=us0dhk6IWmCvmDvBs02yJvC%2BjnzbxqZmb4QEpVVDkxY%3D).
Mitigation
After completing the upgrade to version 12, verify full compliance with the hardening guide and apply all recommended security configurations.
Mitigation
For more detailed mitigation instructions, please see Johnson Controls Product Security Advisory JCI-PSA-2026-05 at https://www.johnsoncontrols.com/trust-center/cybersecurity/security-advisories.
Relevant CWE: CWE-23 Relative Path Traversal
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n7.5 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
Hardcoded credentials in the Frick Controls Quantum HD create a vulnerability that leads to unauthorized access, exposure of sensitive information, and potential misuse or system compromise.
\n\nVendor fix
The Frick Controls Quantum HD, versions 10.22 through 11, are legacy platforms that have reached end of support. Johnson Controls, Inc. recommends upgrading to the latest platform, Quantum HD Unity, version 12 or higher. The update procedure can be found here (https://frickcontrolsblob.file.core.windows.net/frickweb1/Quantum-HD-Unity/Quantum_HD_Unity_Software_Update_Procedure.pdf?sv=2018-03-28&si=frickweb1-174C1294FA7&sr=f&sig=us0dhk6IWmCvmDvBs02yJvC%2BjnzbxqZmb4QEpVVDkxY%3D).
Mitigation
After completing the upgrade to version 12, verify full compliance with the hardening guide and apply all recommended security configurations.
Mitigation
For more detailed mitigation instructions, please see Johnson Controls Product Security Advisory JCI-PSA-2026-05 at https://www.johnsoncontrols.com/trust-center/cybersecurity/security-advisories.
Relevant CWE: CWE-256 Plaintext Storage of a Password
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n6.2 | \nMEDIUM | \nCVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-26 | \n1 | \nInitial Publication | \n
The purpose of this Alert is to provide resources for organizations with Cisco Software-Defined Wide-Area Networking (SD-WAN) systems, including Federal Civilian Executive Branch (FCEB) agencies, to address ongoing exploitation of multiple vulnerabilities. Notably, the Cybersecurity and Infrastructure Security Agency (CISA) has added CVE-2026-20127 and CVE-2022-20775 to its Known Exploited Vulnerabilities (KEV) Catalog on Feb. 25, 2026. As a result of the malicious cyber activity and vulnerabilities involving Cisco SD-WAN systems, CISA has outlined requirements for FCEB agencies in Emergency Directive (ED) 26-03 to inventory Cisco SD-WAN systems, update them, and assess compromise.
\nCISA and partners have observed malicious cyber actors targeting and compromising Cisco SD-WAN systems of organizations, globally. These actors have been observed exploiting a previously undisclosed authentication bypass vulnerability, CVE-2026-20127, for initial access before escalating privileges using CVE-2022-20775 and establishing long-term persistence in Cisco SD-WAN systems.
\nCISA, National Security Agency (NSA), and international partners Australian Signals Directorate\u2019s Australian Cyber Security Centre (ASD\u2019s ACSC), Canadian Centre for Cyber Security (Cyber Centre), New Zealand National Cyber Security Centre (NCSC-NZ), and United Kingdom National Cyber Security Centre (NCSC-UK), hereafter the \u201cauthoring organizations,\u201d strongly urge network defenders to immediately 1) inventory all in-scope Cisco SD-WAN systems, 2) collect artifacts, including virtual snapshots and logs off of SD-WAN systems to support threat hunt activities, 3) fully patch Cisco SD-WAN systems with available updates, 4) hunt for evidence of compromise, and 5) concurrently review Cisco\u2019s latest security advisories, Cisco Catalyst SD-WAN Controller Authentication Bypass Vulnerability and Cisco Catalyst SD-WAN Vulnerabilities, and implement Cisco\u2019s SD-WAN Hardening Guidance.1
\nTo address malicious activity involving vulnerable Cisco SD-WAN systems, CISA issued Emergency Directive 26-03: Mitigate Vulnerabilities in Cisco SD-WAN Systems, which outlines requirements for FCEB agencies to inventory Cisco SD-WAN systems, update them, and assess compromise. Further, CISA released Supplemental Direction ED 26-03: Hunt and Hardening Guidance for Cisco SD-WAN Systems to provide prescriptive actions for FCEB agencies.
\nCisco\u2019s Catalyst SD-WAN Hardening Guide recommends that network defenders address:
\nCISA and the authoring organizations are providing the following resources:\u202f
\nNSA, ASD\u2019s ACSC, Cyber Centre, NCSC-NZ, and NCSC-UK contributed to this alert.
\nThe information in this report is being provided \u201cas is\u201d for informational purposes only. CISA does not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favoring by CISA.\u202f
\n1 Cisco Security, \u201cCisco Catalyst SD-WAN Hardening Guide,\u201d last modified February 9, 2026, https://sec.cloudapps.cisco.com/security/center/resources/Cisco-Catalyst-SD-WAN-HardeningGuide
", "summary_is_html": true, "first_seen": "Wed, 25 Feb 26 12:00:00 +0000", "last_updated": "Wed, 25 Feb 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/alerts/2026/02/25/cisa-adds-two-known-exploited-vulnerabilities-catalog", "title": "CISA Adds Two Known Exploited Vulnerabilities to Catalog", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/alerts/2026/02/25/cisa-adds-two-known-exploited-vulnerabilities-catalog", "summary": "CISA has added two new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThese types of vulnerabilities are frequent attack vectors for malicious cyber actors and pose significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Wed, 25 Feb 26 12:00:00 +0000", "last_updated": "Wed, 25 Feb 26 12:00:00 +0000" }, { "id": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-055-03", "title": "Gardyn Home Kit", "source": "CISA Cybersecurity Advisory", "source_url": "https://www.cisa.gov/news-events/ics-advisories/icsa-26-055-03", "summary": "\nSuccessful exploitation of these vulnerabilities could allow unauthenticated users to access and control edge devices, access cloud-based devices and user information without authentication, and pivot to other edge devices managed in the Gardyn cloud environment.
\nThe following versions of Gardyn Home Kit are affected:
\n| CVSS | \nVendor | \nEquipment | \nVulnerabilities | \n
|---|---|---|---|
| v3 9.1 | \nGardyn | \nGardyn Home Kit | \nCleartext Transmission of Sensitive Information, Use of Default Credentials, Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection'), Use of Hard-coded Credentials | \n
A Gardyn Azure IoT Hub connection string is downloaded over an insecure HTTP connection leaving the string vulnerable to interception and modification through a Man-in-the-Middle attack. This may result in the attacker capturing device credentials or taking control of vulnerable home kits.
\n\nMitigation
Gardyn states that the relevant fixes are included in the latest version of the Gardyn mobile application. Users are required to run a supported version of the Gardyn App on their phone in order to access Gardyn services and devices.
Mitigation
The current versions of the Gardyn App and the Gardyn Home firmware can be checked in the Gardyn App.
Mitigation
For all vulnerabilities, Gardyn recommends users ensure their home kit devices are upgraded to firmware master.619 or later. Gardyn also recommends that users update their mobile application to the most recent version. Gardyn requests that users ensure their home kits have network connectivity in order to automatically download needed firmware updates. Unconnected devices will automatically update when configured with a working Internet connection.
Mitigation
Further information on Gardyn security can be found here: https://mygardyn.com/security/
Mitigation
Further customer support can be obtained from Gardyn at: support@mygardyn.com
Relevant CWE: CWE-319 Cleartext Transmission of Sensitive Information
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L | \n
The Gardyn Home Kit uses weak default credentials for secure shell access. This may result in attackers gaining access to exposed Gardyn Home Kits.
\n\nMitigation
Gardyn states that the relevant fixes are included in the latest version of the Gardyn mobile application. Users are required to run a supported version of the Gardyn App on their phone in order to access Gardyn services and devices.
Mitigation
The current versions of the Gardyn App and the Gardyn Home firmware can be checked in the Gardyn App.
Mitigation
For all vulnerabilities, Gardyn recommends users ensure their home kit devices are upgraded to firmware master.619 or later. Gardyn also recommends that users update their mobile application to the most recent version. Gardyn requests that users ensure their home kits have network connectivity in order to automatically download needed firmware updates. Unconnected devices will automatically update when configured with a working Internet connection.
Mitigation
Further information on Gardyn security can be found here: https://mygardyn.com/security/
Mitigation
Further customer support can be obtained from Gardyn at: support@mygardyn.com
Relevant CWE: CWE-1392 Use of Default Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n8.3 | \nHIGH | \nCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L | \n
The Gardyn Home Kit is vulnerable to command injection through vulnerable methods that do not sanitize input before passing content to the operating system for execution. The vulnerability may allow an attacker to execute arbitrary operating system commands on a target Home Kit.
\n\nMitigation
Gardyn states that the relevant fixes are included in the latest version of the Gardyn mobile application. Users are required to run a supported version of the Gardyn App on their phone in order to access Gardyn services and devices.
Mitigation
The current versions of the Gardyn App and the Gardyn Home firmware can be checked in the Gardyn App.
Mitigation
For all vulnerabilities, Gardyn recommends users ensure their home kit devices are upgraded to firmware master.619 or later. Gardyn also recommends that users update their mobile application to the most recent version. Gardyn requests that users ensure their home kits have network connectivity in order to automatically download needed firmware updates. Unconnected devices will automatically update when configured with a working Internet connection.
Mitigation
For CVE-2025-29631: Gardyn is currently working on a full mitigation to address this vulnerability. As previously stated, Gardyn recommends that users ensure their devices are always updated to the most current firmware version.
Mitigation
Further information on Gardyn security can be found here: https://mygardyn.com/security/
Mitigation
Further customer support can be obtained from Gardyn at: support@mygardyn.com
Relevant CWE: CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N | \n
The administrative credentials can be extracted through application API responses, mobile application reverse engineering, and device firmware reverse engineering. The exposure may result in an attacker gaining full administrative access to the Gardyn IoT Hub exposing connected devices to malicious control.
\n\nMitigation
Gardyn states that the relevant fixes are included in the latest version of the Gardyn mobile application. Users are required to run a supported version of the Gardyn App on their phone in order to access Gardyn services and devices.
Mitigation
The current versions of the Gardyn App and the Gardyn Home firmware can be checked in the Gardyn App.
Mitigation
For all vulnerabilities, Gardyn recommends users ensure their home kit devices are upgraded to firmware master.619 or later. Gardyn also recommends that users update their mobile application to the most recent version. Gardyn requests that users ensure their home kits have network connectivity in order to automatically download needed firmware updates. Unconnected devices will automatically update when configured with a working Internet connection.
Mitigation
Further information on Gardyn security can be found here: https://mygardyn.com/security/
Mitigation
Further customer support can be obtained from Gardyn at: support@mygardyn.com
Relevant CWE: CWE-798 Use of Hard-coded Credentials
\n| CVSS Version | \nBase Score | \nBase Severity | \nVector String | \n
|---|---|---|---|
| 3.1 | \n9.1 | \nCRITICAL | \nCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N | \n
This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).
\nCISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities, such as:
\nMinimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.
\nLocate control system networks and remote devices behind firewalls and isolating them from business networks.
\nWhen remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.
\nCISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
\nCISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.
\nAdditional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
\nOrganizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.
\nNo known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.
\n| Date | \nRevision | \nSummary | \n
|---|---|---|
| 2026-02-24 | \n1 | \nInitial Publication | \n
CISA has added one new vulnerability to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation.
\nThis type of vulnerability is a frequent attack vector for malicious cyber actors and poses significant risks to the federal enterprise.
\nBinding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulnerabilities and Exposures (CVEs) that carry significant risk to the federal enterprise. BOD 22-01 requires Federal Civilian Executive Branch (FCEB) agencies to remediate identified vulnerabilities by the due date to protect FCEB networks against active threats. See the BOD 22-01 Fact Sheet for more information.
\nAlthough BOD 22-01 only applies to FCEB agencies, CISA strongly urges all organizations to reduce their exposure to cyberattacks by prioritizing timely remediation of KEV Catalog vulnerabilities as part of their vulnerability management practice. CISA will continue to add vulnerabilities to the catalog that meet the specified criteria.
", "summary_is_html": true, "first_seen": "Tue, 24 Feb 26 12:00:00 +0000", "last_updated": "Tue, 24 Feb 26 12:00:00 +0000" } ]